Adsorption of Lead from aqueous solutions using natural diatomite
Publish place: 07th International Congress on Chemical Engineering
Publish Year: 1390
نوع سند: مقاله کنفرانسی
زبان: English
View: 893
This Paper With 12 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC07_666
تاریخ نمایه سازی: 25 فروردین 1394
Abstract:
In this work, natural diatomite clay of Iran has been used as an adsorbent for removing of lead from aqueous solution in a batch mode. The effect of several variables like pH, contact time, initial concentration and temperature on lead sorption onto the diatomite is investigated. Kinetic data were analyzed using pseudofirst-order, pseudo-second-order and double-exponential models. The equilibrium experimental data were tested with Freundlich, Langmuir and Dubbin-Radushkevich. The maximum adsorption capacity of lead ion for natural diatomite was found to be 25.01 mg/g at T=45 ºC. Thermodynamic parameters showed that thelead sorption onto the diatomite is endothermic and spontaneous for adsorption of lead. Because of low-costand local availability of natural diatomite; this clay has suitable potential for removal of lead ions in practical process
Keywords:
Authors
Mohammad Irani
Department of Chemical Engineering, Faculty of Engineering, University of Tehran, Tehran, Iran
Mohammad Ali Mousavian
Department of Chemical Engineering, Faculty of Engineering, University of Tehran, Tehran, Iran
Ali Reza Keshtkar
Nuclear Fuel Cycle School, Nuclear Science and Technology Research Institute, Tehran, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :