Identification of Dynamic Damping Properties of a Flexible Structural Adhesive
Publish Year: 1394
نوع سند: مقاله ژورنالی
زبان: English
View: 589
This Paper With 9 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_TAVA-1-1_004
تاریخ نمایه سازی: 21 شهریور 1395
Abstract:
In this paper dynamic damping properties of a nominated flexible structural adhesive have been identified using an extended-direct modal based joint identification method. It has been revealed that damping characteristics of adhesive are correlated to both frequency and mode shape. Young’s and shear moduli increase with frequency but damping on the other hand, decrease. The results showed that mode shape has an important role on the dynamic mechanical properties of adhesive. Modes that dominantly create normal stress on the adhesion surface represent higher stiffness and lower loss factor compared to shear modes. The different level of loss factors between bending modes and shear modes are notable, but damping property of bending modes and shear modes on the other hand, is in the same order and decreases with frequency. It has been shown that the effective, viscoelastic, mechanical properties of the adhesive can be identified successfully, using the suggested method of identification
Keywords:
Identification , Dynamic damping properties , Young's and shear moduli , Experimental modal , analysis
Authors
Mohammad Mehdi Meshki
Department of Aerospace Engineering, Amirkabir University of Technology, ۱۵۸۷۵-۴۴۱۳, Tehran, Iran.
Ali Salehzadeh Nobari
Department of Aerospace Engineering, Amirkabir University of Technology, ۱۵۸۷۵-۴۴۱۳, Tehran, Iran.