InsituPolymerization of Laurolactam towards Polyamide 12
Publish place: دوازدهمین سمینار بین المللی علوم و تکنولوژی پلیمر
Publish Year: 1395
نوع سند: مقاله کنفرانسی
زبان: English
View: 555
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISPST12_103
تاریخ نمایه سازی: 6 اردیبهشت 1396
Abstract:
The insitu ring opening anionic polymerization was successfully performed via the melt blending of laurolactam as monomer towards polyamide 12 (PA12). Sodium caprolactam(NaCL) and toluene diisocyanate (TDI) were introduced to the system as the catalyst and activator, respectively. The polymerization was taken place in an internal mixer and the polymer characteristics were determined. The residual monomer was removed using the solvent extraction method and determined through TGA. Differential scanning calorimetric (DSC), Attenuated total reflectance (ATR) and X-ray diffraction analysis (XRD) were applied in order to specify the physical properties of polymer and confirm the PA12 formation.
Keywords:
ring opening anionic polymerization , polyamide12 , laurolactam , sodium caprolactam , toluenediisocyanate
Authors
Farzaneh Faridirad
Iran polymer and petrochemical institute
Shervin ahmadi
Iran polymer and petrochemical institute
Ghasem Naderi
Iran polymer and petrochemical institute
mohammad barmar
Iran polymer and petrochemical institute
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :