The Effect of Confinement with steel on Seismic Behavior of Reinforced Concrete Frames
Publish Year: 1395
نوع سند: مقاله کنفرانسی
زبان: English
View: 397
This Paper With 13 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICSAU04_0521
تاریخ نمایه سازی: 11 مرداد 1396
Abstract:
The strength and ductility of concrete improve under multiaxial compressive stress. This can be done with concrete confinement technique, using steel jackets. Over the past years, several researchers have developed various stress-strain models for concretes confined with longitudinal and transverse reinforcement steel. This article presented the results from the application of a non-linear finite element method (NFEM) to a normal concrete frame, and concrete frames confined via confinement models developed by various researchers. The effect of the stress-strain models proposed by these researchers on linear and non-linear behaviors of the concrete frame, crack pattern of all models, and ductility parameter of the frames were discussed. Laboratory findings of a concrete frame were selected, and its aforementioned parameters were examined after the calibration of the numerical model and ensuring the validity and accuracy of the findings. Finally, the pushover curves of all models were plotted and compared. Then, the crack patterns of all models were interpreted and ductility parameters were computed. Results from the finite element method (FEM) showed that all pushover curves obtained from the finite element analysis had a linear behavior similar to the validated and laboratory models. Among the obtained pushover curves, models developed by Mander et al. (1988), and Saatcioglu and razvi (1992) had the highest conformity with both the calibrated and laboratory models. The reason behind this conformity was that these researchers considered all effective parameters in developing their stress-strain models.
Keywords:
Authors
Shahab Mojaddad
Masters student, Semnan Branch, islamic azad university, semnan, iran
Ali Hemmati
Assistant Professor, Department of Civil Engineering, Semnan Branch, Islamic Azad University, Semnan, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :