Simultaneous removal of Cd(II), Ni(II), Pb(II) and Cu(II) ions via their complexation with HBANSA based on a combined ultrasound-assisted and cloud point adsorption method using CSG-BiPO4/FePO4 as novel adsorbent: FAAS detection and optimization process

Publish Year: 1396
نوع سند: مقاله کنفرانسی
زبان: English
View: 468

This Paper With 26 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

ICRSIE03_025

تاریخ نمایه سازی: 8 آذر 1396

Abstract:

Ultrasound irradiation, cloud point and adsorption methods were coupled to develop a new technique for the simultaneous removal of Cd(II), Ni(II), Pb(II) and Cu(II) ions after their complexation with (E)-4-((2-hydroxybenzylidene) amino) naphthalene-1-sulfonic acid (HBANSA). In order to reduce cost and improve practicability of process, chitosan gel (CSG) composited with bismuth(III) phosphate/iron(III) phosphate nanoparticles (CSG-BiPO4/FePO4) were hydrothermally synthesized followed by their characterization using FESEM, EDS and XRD analysis. The operational parameters such as metal ions concentration, CSG-BiPO4/FePO4 mass, sonication time and temperature were investigated and optimized using central composite design (CCD). In addition, the possible significant correlation between these variables and removal efficiency wasstudied from which the maximum efficiencies were obtained at 5.57 mg/L, 51.49 ºC, 0.018 g and 10.73 min corresponding to metal ions concentration, temperature, CSGBiPO4/FePO4 and sonication time, respectively. Moreover, at these conditions, the removal percentages of the Cd (II), Ni (II), Pb (II) and Cu (II) ions were found to be 96.24, 93.73, 95.55 and 97.47, respectively. After applying various isotherms, the Langmuir isotherm model was found to be most appropriate model for describing and fitting the experimental equilibrium data and thus maximum mono-layer adsorption capacities of 8.61, 8.54, 8.65 and 8.62 mg/g were obtained for Cd (II), Pb (II), and Cu (II) and Ni (II) ions, respectively. The study of kinetics showed well applicability of pseudo second order kinetic model with maximum mass transfer rate in adsorption process.

Keywords:

Bismuth (III) phosphate/iron (III) phosphate nanoparticles , chitosan gel , cloud point , ultrasound irradiation

Authors

Rmin jannesar

Department of Pathology, Yasuj University of Medical Sciences, Yasuj, Iran

vahid pezeshkpour

Yasuj University of Medical Sciences, Yasuj, Iran