A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts
Publish place: Iranian Journal of Hydrogen & Fuel، Vol: 3، Issue: 1
Publish Year: 1395
نوع سند: مقاله ژورنالی
زبان: English
View: 429
This Paper With 13 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJHFC-3-1_006
تاریخ نمایه سازی: 21 فروردین 1397
Abstract:
In this paper, Ni/Al and La-Ni/Al catalysts were prepared with a co-impregnation method and then employed in a carbon dioxide methanation reaction. The catalytic results showed that the catalyst with (10wt. %) lanthanum and (20wt.%) nickel had the highest activity at low temperatures in CO2 methanation, and the La-Ni/Al catalysts changed the reaction path by lowering its activation energy and consequently increased the rate of reaction. Moreover, the kinetic behavior of the bimetallic and monometallic catalysts in the CO2 methanation reaction was investigated as functions of partial pressures of H2 and CO2 in order to determine the changes in the parameters of power-law type rate expression resulting from the addition second metal to the catalyst and the change in the La/Ni ratio. The reaction orders (α and β) and the rate constant (k) were estimated by non-linear regression analysis that minimized the sum of the squared differences of calculated and experimental CO2 methanation rates. Theresults showed that the reaction rate is more sensitive to H2 partial pressure than CO2 partial pressure
Keywords:
Authors
Soudabeh Rahmani
Catalyst and Advanced Materials Research Laboratory, Chemical Engineering Department, Faculty of Engineering, University of Kashan, Kashan, Iran
Mehran Rezaei
Catalyst and Advanced Materials Research Laboratory, Chemical Engineering Department, Faculty of Engineering, University of Kashan,Kashan, Iran / Institute of Nanoscience and Nanotechnology, University of Kashan, Kashan, Iran
Fereshteh Meshkani
Catalyst and Advanced Materials Research Laboratory, Chemical Engineering Department, Faculty of Engineering, University of Kashan,Kashan, Iran