Magnet Shape Optimization in Surface Mounted Permanent Magnet Machines

Publish Year: 1396
نوع سند: مقاله کنفرانسی
زبان: English
View: 446

This Paper With 12 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

ICME14_103

تاریخ نمایه سازی: 29 فروردین 1397

Abstract:

Surface mounted permanent magnet machines are widely used in low and medium speed ap-plications. Pulsating torque components are the most crucial challenges, especially in low speed applications. Magnet pole shape optimization can be used to mitigate these compo-nents. In this research, an analytical model is proposed to calculate magnetic vector potential in surface mounted permanent magnet machines. A mathematical expression is also derived for optimal magnet shape to reduce cogging torque and electromagnetic torque components. The presented model is based on the resolution of Laplace equation in polar coordinate by us-ing sub-domain method and applying hyperbolic functions. The proposed method is applied on the performance computation of two prototype surface mounted permanent magnet ma-chine, i.e., a 3-phase 12S-6P motor and a 12S-10P motor. The analytical results are validated through FEA method.

Keywords:

Authors

Ali Jabbari

Assistant Professor, Department of Mechanical Engineering, Faculty of Engineering, Arak University, ۳۸۱۵۶-۸-۸۴۹, Arak, Iran.