Estimation of PM10 emission rate due to the Plasco building fire using AERMOD modeling.
Publish place: Third National Conference on Urban Fire Service & Safety
Publish Year: 1396
نوع سند: مقاله کنفرانسی
زبان: English
View: 360
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NFUS03_011
تاریخ نمایه سازی: 2 تیر 1397
Abstract:
In this study, the model of American Meteorological Society-Environmental Protection Agency Regulatory Model (AERMOD) was applied for investigation of PM10 emission rate from Plasco building fire in Tehran city, capital city of Iran. Using reverse engineering approach the PM10 emission rate of Plasco building fire was estimated. Reverse modeling was determined using the AERMOD model and measured PM10 information at the Tehran Municipality Crisis Headquarters Station. The results indicated that the simulated concentration of PM10 using the AERMOD followed the same increase in value as observations in Tehran Municipality Crisis Headquarters Station did due to the Plasco building fire incident in 19th January, 2017. The modeled maximum ground level concentration of 100 ʽg/m3occurred near to emission source for 1- day PM10 dispersion with emission rate of 80 g/sec at the day of accident. The PM10 concentration did not exceeded the limit set by the Iranian Ambient Air Quality Standard even at the day of accident
Keywords:
Authors
m tamjidi
Iran Department of Environment, National center of Air and Climate, Tehran, Iran.
y rashidi
Environmental Sciences Research Institute, Shahid Beheshti University, Tehran, Iran.
p broomandi
Department of Chemical Engineering, Masjed-Soleiman Branch, Islamic Azad University, Masjed-Soleiman,Iran