Deformation Behavior of Reinforced Concrete Two-Way Slabs Strengthened with Different Widths and Configurations of GFRP
Publish place: Civil Engineering Journal، Vol: 3، Issue: 11
Publish Year: 1396
نوع سند: مقاله ژورنالی
زبان: English
View: 379
This Paper With 12 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_CEJ-3-11_010
تاریخ نمایه سازی: 6 آذر 1397
Abstract:
In this paper, we conducted a numerical analysis of the deformation behavior of Steel-reinforced concrete (RC) two-wayslabs strengthened by glass fiber reinforced polymer (GFRP) with different widths and configurations. A total number of36 RC slabs of 12 × 300 × 300 cm were used in this numerical study. Also, a column of 30x30 cm was considered inthe center of the slab for applying static loading. The bonded GFRP strips had 5, 7.5 and 10 cm width (W) and configuredin three models called PM1, PM2, and DM. In PM1 (strip length = 2.4 m) and PM2 (strip length =1.7 m) configurations,the strips were bonded in two directions parallel to the sides of the slab, while in DM configuration (strip length =1.7 m),strips were rotated with 45 degree angle around the central axis that is perpendicular to the surface of the slab. Accordingto the comparison results, we found out that the 5-cm wide strips with PM1 configuration having a parallel space of 0.5times the strip width (0.5W) greatly reduced the deformation of RC two-way slab compared to other strip widths andconfigurations, while 10W strips under all configurations, highly increased the deformation when space between stripsvaried from 1.5W to 2W.
Keywords:
Authors
Hossein Izadi
Department of Civil Engineering, Islamic Azad University, Tiran Branch, Isfahan, Iran
Hamid Pesaran Behbahani
Department of Civil Engineering, Islamic Azad University, Khorasgan Branch, Isfahan, Iran