Employing Montmorillonite Effect in Creating Natural Surfactant When Colliding with Heavy Oil and Reducing the Injective Fluid Loss in the Surfactant Injection to Fracture Reservoir Approach
Publish place: Eighth International Oil, Gas, Refining and Petrochemical Conference with Development Approach to State, University and Industry
Publish Year: 1397
نوع سند: مقاله کنفرانسی
زبان: English
View: 393
This Paper With 14 Page And PDF and WORD Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
OGPD08_023
تاریخ نمایه سازی: 10 اردیبهشت 1398
Abstract:
Today, Nano particles alongside basic fluid are employed in order to enhance the rheological properties of the fluid injected to reservoirs and it is known as Particle Technology. In this article, it is attempted to consider the stability of Nano particles which is crucial in creating Nano clay (Montmorillonite) and have special properties such as high thermal resistance and stability against high pressures. The reduction in the injective fluid loss (Surf, OMMT۲, OMMT-۱, MMT) is acquired through an optimized increase in the viscosity of the injective fluid which is the result of Nano particles inflating in the presence of water. It is aimed to create uniform path for the injective fluid and to control the velocity of the produced fluid. But considering the high sensitivity of the Nano clay particle to water and its inappropriate inflation in reservoir condition, by adding some chemical solutions and changing PH to suitable amount, the appropriate inflation can be reached. For calculating the contact angle in various wettability conditions, the SESSIAL DROP method is used. Calculating the contact angle of surface is one of the ways of assessing the wettability of the surface. The rheological feature of Nano surfactant on rotational viscometer, PVS, is set at ۲۵ C. And IFT is calculated by drip extensometer of DSA۳۰ type made by Kruss company. And some tests, including various rays such as XPS spectroscopy, elemental formations and numerical formulas, chemical, and electronic states, are registered by DSC method and kinetic energy (KE). Investigating the results of clay Nano particle when colliding with heavy oil shows that after certain amount of time, it produces surfactant made of oil which not only improves the fluid properties buy also increases the miscibility by separating light components of oil and eliminating the surface tension, leading to the maximum recovery in reservoirs.
Keywords:
Authors
Elham Tahernezhad
Department o,Tehran,Iran Petroleum Engineering,Faculty of Petroleum ,Universiti Science and Research Branch
Ali Esfandyari Bayat
Department of Petroleum Engineering, Faculty of Petroleum and Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran