Crashworthiness design of multi-cell tapered tubes using response surface methodology
Publish place: Journal of Computational and Applied Research in Mechanical Engineering، Vol: 9، Issue: 1
Publish Year: 1398
نوع سند: مقاله ژورنالی
زبان: English
View: 326
This Paper With 17 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JCARME-9-1_005
تاریخ نمایه سازی: 1 مهر 1398
Abstract:
In this article, crashworthiness performance and crushing behavior of tapered structures with four internal reinforcing plates under axial and oblique dynamic loadings have been investigated. These structures have a tapered form with five cross sections of square, hexagonal, octagonal, decagon and circular shape. In the first step, finite element simulations performed in LS-DYNA were validated by comparing with experimental data. The code generated in LS-DYNA was then used to investigate energy absorption behavior of the tapered structures. Response surface methodology and historical data design technique were employed to optimize the cross section perimeter (tapered angle) of the tapered structures by considering two conflicting crashworthiness criteria including EA (energy absorption) and PCF (peak crushing force). The optimization results showed that the optimal tapered angle enhanced by increasing the number of cross section sides (or number of corners). Then, the optimized tapered structures with different cross-sections were compared with each other using a ranking method called TOPSIS to introduce the most efficient energy absorber. The decagonal structure was finally found to be the best energy absorber.
Keywords:
energy absorption performance , axial and oblique dynamic loading , response surface methodology , TOPSIS
Authors
Sadjad Pirmohammad
Mechanical engineering department, Faculty of Engineering, University of Mohaghegh Ardabili
Sobhan Esmaeili-Marzdashti
Mechanical Engineering Department, Faculty of Engineering, University of Mohaghegh Ardabili, P.O. Box ۱۷۹, Ardabil, Iran.
Arameh Eyvazian
Mechanical and Industrial Engineering Department, College of Engineering, Qatar University, P.O. Box ۲۷۱۳, Doha, Qatar
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :