Improving Reliability by Optimal Allocation of Protection Devices and Distributed Generation Units
Publish place: Signal Processing and Renewable Energy، Vol: 1، Issue: 4
Publish Year: 1396
نوع سند: مقاله ژورنالی
زبان: English
View: 433
This Paper With 13 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_SPRE-1-4_005
تاریخ نمایه سازی: 2 مهر 1398
Abstract:
In this paper, two protective devices, recloser and cutout fuse, are placed simultaneously. Indeed, main contribution of this research is considering Distribution Generation (DG) placement in this problem. The multi objective function has been formulated based on minimizing power loss and maximizing reliability. Selection of reliability indices has been performed based on a compromise between customer satisfaction and seller. This problem is solved by Particle Swarm Optimization (PSO) algorithm and tested on the part of practical distribution system. The reliability indices are System Average Interruption Duration Index (SAIFI), Cost of Energy Not Supplied (CENS), System Average Interruption Frequency Index (SAIFI) and Momentary Average Interruption Frequency Index (MAIFI). Simulation has been performed in part of practical distribution system by introduced several scenarios and cases.
Keywords:
Protection design , particle swarm optimization algorithm , Reliability Improvement , Distribution network
Authors
Hamidreza Akbari
Faculty of Electrical Engineering, Islamic Azad University, Yazd Branch, Yazd, Iran
Amirhosein Bolurian
Faculty of Electrical Engineering, Islamic Azad University, Yazd Branch, Yazd, Iran
Mahmoud Modaresi
Faculty of Electrical Engineering, Islamic Azad University South Tehran Branch, Tehran, Iran