Modelling Mechanical Properties of AISI 439-430Ti Ferritic Stainless Steel Sheet

Publish Year: 1398
نوع سند: مقاله ژورنالی
زبان: English
View: 218

This Paper With 15 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_JSMA-11-2_013

تاریخ نمایه سازی: 12 اسفند 1398

Abstract:

The comprehension of the anisotropy impacts on mechanical properties of the rolled steel sheets was investigated using a non-quadratic anisotropic yield function. In this study, experimental and modelling determination regarding the behaviour of an industrial rolled sheet for a ferritic stainless low-carbon steel were carried out. The parameters of the associated yield equation, derived from the three orthotropic yield functions proposed by Hill48, Yld96 and Yld2000-2d, were determined. Predictions and the evolution of normalized yield stress and normalized Lankford parameters (plastic strain ratio) obtained by the presented investigative are considered. The forecasts given by the YLD2000-2d criterion are consistent with that of the experience. In order to describe the path of strain behavior, the isotropic hardening function is described using the following four empirical standard formulae based on: Hollomon, Ludwick, Swift and Voce law. More accurately, the anisotropy coefficients of three yield functions are represented as a function of the longitudinal equivalent plastic strain.

Authors

N Brinis

Engineering Sciences and Advanced Materials Laboratory (ISMA), Laghrour-Abbes University of Khenchela, Algeria

B Regaiguia

Engineering Sciences and Advanced Materials Laboratory (ISMA), Laghrour-Abbes University of Khenchela, Algeria ---Metallurgy and Engineering Materials, Badji-Mokhtar University of Annaba, Algeria

O Chahaoui

Engineering Sciences and Advanced Materials Laboratory (ISMA), Laghrour-Abbes University of Khenchela, Algeria

N Maatougui

National School of Mines and Metallurgy-Annaba, Algeria

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Liu W., Guines D., Leotoing L. , Ragneau E., 2015, ...
  • Chahaoui O., Fares M. L., Piot D., Montheillet F., 2011, ...
  • Chahaoui O., Fares M. L., Piot D., and Montheillet F., ...
  • Hill R., 1948, A theory of yielding and plastic flow ...
  • Hosford W.F., 1972, A generalized isotropic Yield criterion, Journal of ...
  • Barlat F., Lian J., 1989, Plastic behavior and stretchability of ...
  • Barlat F., Lege D. J., Brem J. C., 1991, A ...
  • Barlat F., Becker R.C., Hayashida Y., Maeda Y., Yanagawa M., ...
  • Barlat F., Maeda Y., Chung K., Yanagawa M., Brem J.C., ...
  • Barlat F., Brem J.C., Yoon J.W., Chung K., Dick R.E., ...
  • Barlat F., Aretz H., Yoon J. W., Karabin M.E., Brem ...
  • Aretz H., Aegerter J., Engler O., 2010, Analysis of earing ...
  • Zhang S., Leotoing L., Guines D., Thuillier S., Zang S.l., ...
  • Zang S. L., Thuillier S., Le Port A., Manach J. ...
  • Wang H., Wan M., Wu X., Yan Y., 2009, The ...
  • Cazacu O., Barlat F., 2001, Generalization of Drucker’s yield criterion ...
  • Kawka M., Makinouchi A., 1996, Plastic anisotropy in FEM analysis ...
  • Taejoon P., Kwansoo C., 2012, Non-associated flow rule with symmetric ...
  • Basak S., Bandyopadhyay K., Panda S. K., Saha P., 2015, ...
  • Basak S., Bandyopadhyay K., Panda S. K., Saha P., 2014, ...
  • Watson M., Robert R., Huang Y.H., Lockley A., Cardoso R., ...
  • نمایش کامل مراجع