Comparison of Stiffness and Failure Behavior of the Laminated Grid and Orthogrid Plates

Publish Year: 1396
نوع سند: مقاله ژورنالی
زبان: English
View: 280

This Paper With 12 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_JSMA-9-1_010

تاریخ نمایه سازی: 12 اسفند 1398

Abstract:

The present paper investigates the advantages of a new class of composite grid structures over conventional grids. Thus far, a known grid structure such as orthogrid or isogrid has been used as an orthotropic layer with at most in-plane anisotropy. The present laminated grid is composed of various numbers of thin composite grid layers. The stiffness of the structure can be adjusted by choosing proper stacking sequences. This concept yields to a large variety of laminated grid configurations with different coupling effects compare to conventional grids. To illustrate the advantages of the laminated grids, the stiffness matrices and the bending response of the laminated and conventional grids are compared. Furthermore, a progressive failure analysis is implemented to compare the failure resistance of laminated and conventional grids. The results indicate that, thoughtful selection of stacking sequences of the laminated grid enhances the stiffness and response of the laminated grids without significant effect on the failure index.

Authors

A Ehsani

Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran

J Rezaeepazhand

Department of Mechanical Engineering, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad,Iran.

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Huybrechts S.M., Hahn S.E., Meink T.E., 1999, Grid stiffened structures: ...
  • Chen H.J., Tsai S.W., 1996, Analysis and optimum design of ...
  • Gürdal Z., Gendron G., 1993, Optimal design of geodesically stiffened ...
  • Oliveira J.G., Christopoulos D.A., 1981, A practical method for the ...
  • Kidane S., Li G., Helms J., Pang S.S., Woldesenbet E., ...
  • Ambur D.R., Jaunky N., 2001, Optimal design of grid-stiffened panels ...
  • Chen C.J., Liu W., Chern S.M., 1994, Vibration analysis of ...
  • Shi S., Sun Z., Ren M., Chen H., Hu X., ...
  • Lai C., Wang J., Liu C., 2014, Parameterized finite element ...
  • Huang L., Sheikh A.H., Ng C. T., Griffith M.C., 2015, ...
  • Anyfantis K.N. , Tsouvalis N.G., 2012, Post buckling progressive failure ...
  • Pietropaoli E., 2012, Progressive failure analysis of composite structures using ...
  • Kollar L.P., Springer G.S., 2003, Mechanics of Composite Structures, Cambridge ...
  • Naik N.K., Chandra Sekher Y., Meduri S., 2000, Damage in ...
  • Barbero E.J., 1999, Introduction to Composite Materials Design, Taylor & ...
  • Chang F. K., Chang K.Y., 1987, A progressive damage model ...
  • Lessard L.B., Shokrieh M.M., 1995, Two-dimensional modeling of composite pinned-joint ...
  • Ambur D.R., Jaunky N., Hilburger M.W., 2004, Progressive failure studies ...
  • نمایش کامل مراجع