Published in: 4TH Iran International Aluminum Conference
COI code: IIAC04_062
Paper Language: English
How to Download This Paper
For Downloading the Fulltext of CIVILICA papers please visit the orginal Persian Section of website.
Authors Recycling of aluminium alloy ADC12 tunring chips via mechanical stirrerHasan akbari - Thechnical Department, Bu Ali Sina university, P.O. Box: 6517838695, hamedan, iran
Shahab kazemi - Thechnical Department, Bu Ali Sina university, P.O. Box: 6517838695, hamedan, iran
Abstract:Recycling of the aluminum is considered to be a sustainable process, as it requires significantly less energy than extracting mined bauxite ore from its natural resources. Aluminum chips collected from machining operations are specifically suitable for this process, as their high surface area to weight ratio allows for more rapid oxidation and increases the value of the recycling[2, 3].In the present study, recyclability of aluminum alloy ADC12 which is commonly used in die-casting industry, has been experimentally investigated using a mechanical stirrer in molten aluminum method. The implemented mechanical stirrer included a motor, a gearbox, and two plates for generating turbulence in molten aluminum and the aluminum chips were added to the melt during stirring process. The efficiency of the recycling has been measured by calculating the percent of weight loss. Also, the chemical composition of the samples were compared with the reference one that was obtained from melting.The results showed that the proposed method is able to recycle up to 94 percent of the Chips and to recover all of the main elements. Also the achieved mechanical properties of the recycled aluminum were shown to be very to those of the aluminum ADC12 alloy ingot
Keywords:Aluminium chips,recycling,machanical stirrer,melting,Die casting
COI code: IIAC04_062
how to cite to this paper:If you want to refer to this article in your research, you can easily use the following in the resources and references section:
akbari, Hasan & Shahab kazemi, 2016, Recycling of aluminium alloy ADC12 tunring chips via mechanical stirrer, 4TH Iran International Aluminum Conference, تهران, مركز تحقيقات آلومينيوم ايران, https://www.civilica.com/Paper-IIAC04-IIAC04_062.htmlInside the text, wherever referred to or an achievement of this article is mentioned, after mentioning the article, inside the parental, the following specifications are written.
First Time: (akbari, Hasan & Shahab kazemi, 2016)
Second and more: (akbari & kazemi, 2016)
For a complete overview of how to citation please review the following CIVILICA Guide (Citation)
Research Info Management
Export Citation info of this paper to research management softwares
New Related Papers
- INVESTIGATION OF Cr EFFECT ON THE MICROSTRUCTURE AND TENSILE PROPERTIES OF AL-12Zn-2.5Mg-2.5Cu ALUMINUM ALLOY
- THE EFFECT OF Al–5Ti–1B AND Al–15Zr MASTER ALLOYS ON THE MICROSTRUCTURE AND TENSILE PROPERTIES OFEXTRUDED AA2014 Al ALLOY
- Effect of premix solution on mechanical properties and gelation behaviors of Al2O3-ZrO2 Composite
- EFFECTS OF HOT EXTRUSION ON MICROSTRUCTURE OF Al – 16 WT.% Al4Sr IN-SITU METAL MATRIX COMPOSITE CONTAINING DIFFERENT WEIGHT PERCENTAGES OF Cu
- EFFECTS OF HOT EXTRUSION RATIO ON MICROSTRUCTURE OF Al – 25 WT.%Mg2Si IN-SITU METAL MATRIX COMPOSITE
The Above articles are recently indexed in the related subjects
Iran Scientific Advertisment Netword
Share this paper
WHAT IS COI?
COI is a national code dedicated to all Iranian Conference and Journal Papers. the COI of each paper can be verified online.