Experimental and Numerical Buckling Analysis of Carbon Fiber Composite Lattice Conical Structure before and after Lateral Impact
Publish Year: 1399
نوع سند: مقاله ژورنالی
زبان: English
View: 651
This Paper With 10 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JACM-6-4_008
تاریخ نمایه سازی: 11 تیر 1399
Abstract:
In this research, the numerical and experimental analysis of the carbon fiber composite lattice conical structure has been performed to assess the buckling stability of the structure before and after the lateral impact. In the experimental analysis, the carbon fiber composite lattice conical structure was constructed with the winding method and using elastic molds and metal mandrel. In order to investigate the buckling stability of the structures before each lateral impact, they are subjected to be compressive-axial loading. The rest of the structures first subjected under the axial-compressive loading, then in the next step, a compressive loading is applied to determine the effect of the impact on the compressive strength of the damaged structures. In the numerical analysis, the Abaqus software is used to modeling and performing the mentioned analysis. Finally, the comparison of the results shows that the effect of the lateral impact causes how many reductions will be occurred in the buckling strength. So, it should be considered during the design of the applied structures. On the other hand, the low difference between the numerical and experimental simulations shows that the experimental and numerical methods can be used to analyze the structures with different geometric characteristics and material.
Keywords:
Conical lattice structure made of carbon , experimental and numerical analysis , lateral impact , buckling analysis
Authors
Ahmad Ahmadifar
M.Sc. Student, Mechanical Engineering Department, Malek-Ashtar University of Technology, Tehran, Iran
Mohammad Reza Zamani
Assistant Professor, Mechanical Engineering Department, Malek-Ashtar University of Technology, Tehran, Iran
Ali Davar
Assistant Professor, Composite Research Centre, Malek-Ashtar University of Technology, Tehran, Iran
Jafar Eskandari Jam
Professor, Mechanical Engineering Department, Malek-Ashtar University of Technology, Tehran, Iran
Mohsen Heydari Bani
Ph.D. Student, Mechanical Engineering Department, Malek-Ashtar University of Technology, Tehran, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :