Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory

Publish Year: 1398
نوع سند: مقاله ژورنالی
زبان: English
View: 380

This Paper With 17 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_JCAM-50-2_015

تاریخ نمایه سازی: 31 تیر 1399

Abstract:

In this study, nonlinear analysis for thick cylindrical pressure vessels with arbitrary variable thickness made of hyperelastic functionally graded material properties in nearly incompressible state and clamped boundary conditions under non-uniform pressure loading is presented. Thickness and pressure of the shell are considered in axial direction by arbitrary nonlinear profiles. The FG material properties of nearly incompressible hyperelastic shell are graded in the radial direction with a power law distribution. Effective combination of shear deformation theory and match asymptotic expansion of perturbation theory are used to derived and solve the nonlinear governing equations, respectively. A numerical modelling based on finite element method is presented to validate the results of the current analytical solution. The effect of material constants, non-homogeneity index, geometry and pressure profiles on displacements, stresses and hydrostatic pressure distributions are illustrated for different hyperelastic material properties and case studies. This approach enables insight to the nature of the deformation and stress distribution through the thickness of rubber vessels and may offer the potential to study the mechanical functionality of blood vessels such as artificial or natural arteries in physiological pressure range.

Authors

Hamed Gharooni

Department of Mechanical Engineering, Shahrood University of Technology, Shahrood, Iran

Mehdi Ghannad

Department of Mechanical Engineering, Shahrood University of Technology, Shahrood, Iran,

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • M. C. Boyce, E. M. Arruda, Constitutive Models of Rubber ...
  • T. Sussman, K.-J. Bathe, A finite element formulation for nonlinear ...
  • S. Doll, K. Schweizerhof, On the Development of Volumetric Strain ...
  • O. Lopez-Pamies, A new -based hyperelastic model for rubber elastic ...
  • I. Bijelonja, I. Demirdžić, S. Muzaferija, A finite volume method ...
  • Y. Zhu, X. Y. Luo, R. W. Ogden, Nonlinear axisymmetric ...
  • M. Tanveer, J. W. Zu, Non-linear vibration of hyperelastic axisymmetric ...
  • G. Montella, A. Calabrese, G. Serino, Mechanical characterization of a ...
  • J. Kiendl, M.-C. Hsu, M. C. H. Wu, A. Reali, ...
  • D. Azar, D. Ohadi, A. Rachev, J. F. Eberth, M. ...
  • J. Vossoughi, A. Tozeren, Determination of an effective shear modulus ...
  • L. A. Mihai, A. Goriely, How to characterize a nonlinear ...
  • C. M. Scotti, A. D. Shkolnik, S. C. Muluk, E. ...
  • C. Lally, F. Dolan, P. J. Prendergast, Cardiovascular stent design ...
  • G. Chagnon, M. Rebouah, D. Favier, Hyperelastic Energy Densities for ...
  • Y. Ikeda, Y. Kasai, S. Murakami, S. Kohjiya, Preparation and ...
  • E. Bilgili, Controlling the stress–strain inhomogeneities in axially sheared and ...
  • E. Bilgili, Modelling mechanical behaviour of continuously graded vulcanised rubbers, ...
  • O. Lopez-Pamies, P. Ponte Castañeda, On the overall behavior, microstructure ...
  • R. C. Batra, A. Bahrami, Inflation and eversion of functionally ...
  • Y. Anani, G. H. Rahimi, Stress analysis of thick pressure ...
  • Y. Anani, G. H. Rahimi, Stress analysis of rotating cylindrical ...
  • M. H. Ghadiri Rad, F. Shahabian, S. M. Hosseini, Geometrically ...
  • H. R. Eipakchi, Third-order shear deformation theory for stress analysis ...
  • H. Gharooni, M. Ghannad, M. Z. Nejad, Thermo-Elastic Analysis of ...
  • M. Ghannad, G. H. Rahimi, M. Z. Nejad, Elastic analysis ...
  • M. Jabbari, M. Z. Nejad, M. Ghannad, Thermo-elastic analysis of ...
  • M. Z. Nejad, M. Jabbari, M. Ghannad, Elastic analysis of ...
  • Z. Mazarei, M. Z. Nejad, A. Hadi, Thermo-Elasto-Plastic Analysis of ...
  • M. Z. Nejad, N. Alamzadeh, A. Hadi, Thermoelastoplastic analysis of ...
  • M. Hosseini, M. Shishesaz, A. Hadi, Thermoelastic analysis of rotating ...
  • M. Z. Nejad, A. Hadi, Non-local analysis of free vibration ...
  • M. Z. Nejad, A. Hadi, A. Rastgoo, Buckling analysis of ...
  • M. Z. Nejad, A. Hadi, A. Omidvari, A. Rastgoo, Bending ...
  • H. Ghaemi, K. Behdinan, A. Spence, On the development of ...
  • C. A. C. SILVA, M. L. BITTENCOURT, Structural shape optimization ...
  • G. A. Holzapfel, 2000, Nonlinear Solid Mechanics, a Continuum Approach ...
  • Y. Başar, D. Weichert, 2000, Nonlinear Continuum Mechanics of Solids, ...
  • J. H. Kim, S. Avril, A. Duprey, J. P. Favre, ...
  • I. Doghri, 2000, Mechanics of Deformable Solids, Springer, Berlin ...
  • A. H. Nayfeh, 1993, Introduction to Perturbation Techniques, Wiley, New ...
  • V. Dias, C. Odenbreit, O. Hechler, F. Scholzen, T. Ben ...
  • A. P. S. Selvadurai, M. Shi, Fluid pressure loading of ...
  • G. A. Holzapfel, T. C. Gasser, Computational stress-deformation analysis of ...
  • M. Abdessamad, M. Hasnaoui, M. Agouzoul, Analytical Modeling of a ...
  • J. D. Humphrey, S. L. O’Rourke, 2015, An Introduction to ...
  • R. C. Batra, Material tailoring and universal relations for axisymmetric ...
  • M. J. Łos, S. Panigrahi, K. Sielatycka, C. Grillon, Successful ...
  • نمایش کامل مراجع