Influence of Vibratory Finishing Process by Incorporating Abrasive Ceramics and Glassy Materials on Surface Roughness of CK۴۵ Steel
Publish place: International Journal of Advanced Design and Manufacturing Technology، Vol: 9، Issue: 4
Publish Year: 1395
نوع سند: مقاله ژورنالی
زبان: English
View: 187
This Paper With 6 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ADMTL-9-4_001
تاریخ نمایه سازی: 18 اردیبهشت 1400
Abstract:
The vibratory finishing is one of the important mass finishing processes. This can be applied for finishing many metallic and non- metallic components using abrasive materials such as steel, ceramic, natural materials and etc. The vibratory finishing process is used for some purposes such as surfaces polishing, deburring, oxide layer removing and rounding the edges. Evaluation of surface roughness changes with time that is one of the important parameters during the vibratory finishing process. In this study, the effects of the working time and abrasive materials are investigated on the surface roughness changes of CK۴۵ steel samples. The ceramic, glass and mixed abrasive particles are used as the abrasive media. The experiments are performed at different time from ۱۰ to ۱۲۰ minutes in the dry environment. Finally, the surface roughness values of samples were measured and then fitted by a regression equation for description of the surface roughness changes with time. According to the results, the maximum surface finish was obtained after ۱۲۰ minutes by using mixed abrasive materials. The surface roughness improved approximately ۶۰%.
Keywords:
Authors
Payam Saraeian
Department of Materials Engineering, Islamic Azad University of Najafabad Branch, Isfahan, Iran
Mostafa Gholami
Department of Materials Engineering, Islamic Azad University of Najafabad Branch, Isfahan, Iran
Amir Behagh
Arshan Sanat Jam Co. ltd, Isfahan, Iran
Omid Behagh
Arshan Sanat Jam Co. ltd, Isfahan, Iran
Hamid Reza Javadinejad
Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran
Mohammad Mahdieh
UniverSchool of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran sity of Tehran (UT)
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :