Effect of Covering Aperture of Conical Cavity Receiver on Thermal Performance of Parabolic Dish Collector: Experimental and Numerical Investigations
Publish Year: 1400
نوع سند: مقاله ژورنالی
زبان: English
View: 250
This Paper With 13 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JREE-8-4_004
تاریخ نمایه سازی: 10 آبان 1400
Abstract:
In this study, the effect of covering the aperture area of a conical cavity receiver with an ultra-white glass on operational parameters of a Parabolic Dish Collector (PDC) was numerically and experimentally investigated under climate conditions of Tehran (۳۵.۴۴° N latitude and ۵۱.۱۰° longitude). The main components of the experimental setup include a dish reflector, a conical cavity receiver, Heat Transfer Fluid (HTF), hydraulic and cooling cycle, and a sun tracker. For this purpose, a conical cavity receiver with an ultra-white glass cover on its aperture was numerically modeled in Fortran software. During the evaluation, environmental parameters including ambient temperature, solar radiation, and wind speed were considered as inputs of the model. The results revealed fair agreement between the numerical and experimental data with the maximum error of approximately ۴.۶۳ % and ۷.۸۹ % for receivers with and without the glass cover on the aperture, respectively. For a steady-state analysis, the mean values of useful energy ( ) absorbed by the receiver were calculated as ۱,۲۵۳.۲۵ W and ۹۸۷.۶۸ W, while thermal efficiency ( ) of the receiver was calculated as ۵۲.۶۱ % and ۴۰.۶۹ % for receivers with and without glass cover, respectively. The results revealed that both and followed a similar trend of the variations in the HTF’s temperature between the inlet and outlet of the receiver. Also, the overall heat loss coefficient ( ) and the collector heat removal factor ( ) were calculated as ۴۲۰.۷۶ W/m۲°C and ۰.۶۲ for the conical cavity receiver with the glass cover.
Keywords:
Authors
Sina Eterafi
Department of Biosystems Engineering, Factuly of Agriculture, Tarbiat Modares University (TMU), P. O. Box: ۱۴۱۱۵-۱۱۱, Tehran, Tehran, Iran.
Shiva Gorjian
Department of Biosystems Engineering, Factuly of Agriculture, Tarbiat Modares University (TMU), P. O. Box: ۱۴۱۱۵-۱۱۱, Tehran, Tehran, Iran.
Majid Amidpour
Department of Energy System Engineering, Factuly of Mechanical Engineering, K. N. Toosi University of Technology, P. O. Box: ۱۹۳۹۵-۱۹۹۹, Tehran, Tehran, Iran.
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :