An overview of the effect of design on the cableway load
Publish place: The 5th International Conference on Global Studies in Civil Engineering, Architecture, and Urban Planning
Publish Year: 1400
نوع سند: مقاله کنفرانسی
زبان: English
View: 177
This Paper With 12 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
GSECONF05_009
تاریخ نمایه سازی: 18 اسفند 1400
Abstract:
In this paper, we examine the optimal design method of a single-cable freight rope to reduce its manufacturing cost. It can be understood that the pitch and height of the middle support, the main tensile force of the load-bearing ropes, is the main factor in increasing the cost of the cable car. A nonlinear optimization method is determined by the above factors, ensuring the minimum cost of a cable bundle with a maximum design capacity of up to ۶۰۰ tons per hour. The purpose of optimization is examined by considering the limitations of design, assembly, deformation, and strength. The criteria for changing the optimal parameters of the intermediate supports and ropes carrying the load and tension were shown in changing the design capacity of a cable road based on the analysis of the calculations performed. The results of this optimization work will significantly reduce the cost of building freight air railway.
Keywords:
Authors
Mohammad Hossein Taghavi Parsa
Ph.D. in stucture, Department of Civil Engineering, University of imam hossein university, Tehran,
Rasool Nodeh Farahani
Ph.D. candidate, Department of Civil Engineering, University of Babol Technology, Babol, Iran,