سیویلیکا را در شبکه های اجتماعی دنبال نمایید.

Numerical Study of Channel Convergence Effects on Flow Pattern in 90 Degree Bends

Publish Year: 1391
Type: Conference paper
Language: English
View: 1,524

This Paper With 8 Page And PDF Format Ready To Download

Export:

Link to this Paper:

Document National Code:

ICCE09_608

Index date: 28 September 2012

Numerical Study of Channel Convergence Effects on Flow Pattern in 90 Degree Bends abstract

As a result of topography changes along the open channels, designing the right bend is an essential. Channel width limits, such as existence of culverts beneath the roads and sharp changes in topographies, usually impel engineers to design non-prismatic or converging bends along the open channels. In this research the flow pattern in a 90o curved converging rectangular open channel is numerically investigated. A three-dimensional simulation was carried out using the commercial CFD package ANSYS-FLUENT. To obtain the most accurate pattern, five different turbulence models: standard k-ε, realizable k-ε, RNG k-ε, k-ω and RSM, along with the VOF free surface model were utilized to solve the 3D Navier-Stokes equations. The accuracy of the model was analyzed with observed data from experimental study of an ordinary 90o open channel curvature as a qualitative reference and the computed results of the present study were validated. The predicted results for the flow characteristics are in reasonable agreement with the experiment data. As extent of the work, a converging open channel bend was simulated and the velocity profiles and the flow separation after the bend are evaluated. It has been concluded that unlike the ordinary open channel bend, the minimum velocity in a converging channel occurs in different locations along the bend while the separation zone is eliminated. Concerning how it can affect the conveyance capacity and channel width, the issue could be attention-getting in the study of sedimentary processes of meandering rivers

Numerical Study of Channel Convergence Effects on Flow Pattern in 90 Degree Bends Keywords:

Numerical Study of Channel Convergence Effects on Flow Pattern in 90 Degree Bends authors

Omid Seyedashraf

M.Sc. Student, Department of Civil Engineering, Razi University of Kermanshah, Iran

Ali Akbar Akhtari

Assistant Professor, Department of Civil Engineering, Razi University of Kermanshah, Iran

Milad Khatib Shahidi

M.Sc. Student, Civil Engineering Faculty, University of Tabriz, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
I. Leopold, Luna B. and Gordon-Wo lman, _ (1960), SRIVER ...
Yalin, M.S. (1992), "River Mechanics, " Pergamon Press, Oxford 1992. ...
Thompson, James. (1876), "On the origin of the windings of ...
Rozovskii, I.L. (1957), "Flow of water in bends of open ...
Akhtari, A.A (2010), "surveying flow in strongly -curved open channel ...
Akhtari, A.A (2009), "experimental investigation water surface characteristic in strongly ...
De Vriend, H.J. (1976), _ mathematical model of steady flow ...
Kuipers, J. and Vreugdenhil, C.B. (1973), "Calculations of two -dimensional ...
Ghamry, H.K. (1999), _ Dimensional Vertically Averaged and Moment Equations ...
Damaskinidou Georgiadou, A. and Kemneth, V.H. Smith, (1986), "Flow in ...
Gaudio, P. and Malizia, A. and Lupelli, I. (2011), _ ...
FLUENT 6.3 User's Guide, September 2006. ...
Hirt, C.W., & Nicholas, B.D., _ of Fluid (VOF) method ...
نمایش کامل مراجع