سیویلیکا را در شبکه های اجتماعی دنبال نمایید.

An Analytical Estimation of the Strength of River Dikes Concrete Revetments Subjected to Ice Loads in Condition of Existence of Nonzero Shear Force

Publish Year: 1391
Type: Conference paper
Language: English
View: 1,639

This Paper With 7 Page And PDF Format Ready To Download

Export:

Link to this Paper:

Document National Code:

ICCE09_964

Index date: 28 September 2012

An Analytical Estimation of the Strength of River Dikes Concrete Revetments Subjected to Ice Loads in Condition of Existence of Nonzero Shear Force abstract

Reinforced concrete continuous coverings are partly used as a fine revetment in river dikes. In icy regions, there is the possibility of freezing the water surfaces. If this condition happens, even once during the design period of a revetment, it will have severe destructive effects on it. Therefore, the strength control of revetments under the ice loads caused by frozen water surface would be useful in sub-zero conditions. The most critical condition would be forming a frozen layer on water surface then lowering the water level under this frozen layer that may cause the frozen layer floated. So far, analytical studying of the revetment strength under ice loads considering above situation has been carried out so less. This method would be applicable in rivers capable of freezing in which concrete lining dikes is designed and applied. In this paper, an analytical method is proposed to determine the concrete revetment strength under the condition of existence of nonzero shear force

An Analytical Estimation of the Strength of River Dikes Concrete Revetments Subjected to Ice Loads in Condition of Existence of Nonzero Shear Force Keywords:

An Analytical Estimation of the Strength of River Dikes Concrete Revetments Subjected to Ice Loads in Condition of Existence of Nonzero Shear Force authors

Armaghan Abed-Elmdoust

PHD Student, School of Civil Engineering, University of Tehran, Tehran, Iran

Reza Kerachian

Associate Professor, School of Civil Engineering, University of Tehran, Tehran, Iran;