سیویلیکا را در شبکه های اجتماعی دنبال نمایید.

Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test

Publish Year: 1393
Type: Journal paper
Language: English
View: 143

This Paper With 12 Page And PDF Format Ready To Download

Export:

Link to this Paper:

Document National Code:

JR_IJMF-1-0_004

Index date: 5 September 2023

Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test abstract

In this work dynamic recrystallization behavior of AISI 403 martensitic stainless steel was studied using hot compression tests over temperature range of 900 C -1200 C and strain rate range of 0.001 s-1 - 1 s-1. The obtained flow curves showed that the hot compression behavior of the alloy is controlled by dynamic recrystallization. The flow stress and strain corresponding to the critical, peak and onset of steady state region were related to the Zener-Hollomon parameter using simple power equations. The variation of dynamic recrystallization fraction with strain showed that restoration kinetics is enhanced with increasing temperature and decreasing strain rate. The development of DRX was modeled using Avrami Kinetics equation. The equations proposed by Baragar and Cingara-McQueen were used to develop a new model capable of predicting the flow curves up to the onset of steady state flow region. This work softening is mainly controlled by the phenomenon dynamic recrystallization.

Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test Keywords:

Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test authors

E. Kevanlo

Department of Materials and Polymer Engineering, Hakim Sabzevari University, Sabzevar, Iran

G.R. Ebrahimi

Sabzevar, Iran

S.A.A. Sani

Department of Materials Science and Engineering, Iran University of Sience and Technology, Tehran, Iran

A. Momeni

Department of Materials Science and Engineering, Hamedan University of Technology, Hamedan, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
M. Mirzaee, H. Keshmiri, G.R. Ebrahimi and A. Momeni, Dynamic ...
T. Yan, E. Yu and Y. Zhao, Constitutive modeling for ...
H. Dehghan, S.M. Abbasi, A. Momeni and A. Karimi Taheri, ...
A. Momeni, K. Dehghani, M. Heidari and M. Vaseghi, Modeling ...
A. Momeni, K. Dehghani, and G.R. Ebrahimi, Modeling the initiation ...
W. Bang, C.S. Lee and Y.W. Chang, Finite element analysis ...
J. Huang and Z. Xu, Evolution mechanism of grain refinement ...
L. Sahebdel, S.M. and Abbasi, A. Momeni, Microstructural evolution through ...
L. Wang, F. Liu, Q. Zuo and C.F. Chen, Prediction ...
E.I. Poliak and J.J. Jonas, A one-parameter approach to determining ...
A. Momeni and K. Dehghani, Microstructural evolution and flow analysis ...
G.R. Ebrahimi, A. Momeni, M. Jahazi and P. Bocher, Dynamic ...
G.R. Ebrahimi, H. Keshmiri, A. Momeni and M. Mazinani, Dynamic ...
J.J. Jonas, X. Quelennec, L. Jiang and E. Martin, The ...
A. Momeni, S.M. Abbasi and H. Badri, Hot deformation behavior ...
S. H. Cho and Y. C. Yoo, Hot rolling simulations ...
A. Momeni, K. Dehghani, G.R. Ebrahimi and H. Keshmiri, Modeling ...
F. C. Ren, J. Chen and F. Chen, Constitutive modeling ...
S. L. Semiatin, G. Damamme, D. Piot and F. Montheillet, ...
G.R. Ebrahimi, H. Keshmiri, A. Maldad and A. Momeni, Dynamic ...
Z. Zeng, L. Chen, F. Zhu and X. Liu, Dynamic ...
P. Bernard, S. Bag, K. Huang and R.E. Loge, A ...
A. Momeni, G.R. Ebrahimi, M. Jahazi and P. Bocher, Microstructure ...
Z. Zeng, S. Jonsson, H. Jørgen Roven and Y. Zhang, ...
D.L. Baragar, The high temperature and high strain-rate behavior of ...
Cingara and H.J. McQueen, New formula for calculating flow curves ...
نمایش کامل مراجع