PULSE ELECTRODEPOSION OF Ni-TiN NANOCOMPOSITE COATING AND INVETIGATING IT’S CORROSION PROPERTIES
Publish place: 1st International and 6th Joint Conference of Iranian Society of Metallurgical Engineers and the scientific community of Casting
Publish Year: 1391
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,122
This Paper With 11 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES06_476
تاریخ نمایه سازی: 8 بهمن 1391
Abstract:
In this study, nanocomposite coating with nickel matrix and nano TiN powder was synthesized. These coatings have been produced by electroplating technique and pulse current was applied to comparedifferent properties by altering it’s parameters. The surface morphology has been studied by SEM microscopy. Also XRD patterns and EDX curves were used to investigate the phases which existed in the coatings and to calculate the percentage of each in them. It was shown that by increasing the current density, the amount of the powder in the coating was increased. The corrosion resistance wasdecreased during elevating the current density. In addition, by lowering the duty cycle, the amount ofpowder was increased. According to the duty cycle data, it was concluded that the higher the amount of the nano phase in the coatings, the better will be the corrosion resistance of the coatings
Keywords:
Authors
Tina Shadloo
M. S. Student Department of Metallurgy and Material Science, Tehran University, Tehran, Iran
Changiz Dehghanian
Prof)
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :