Adsorption of CH۴ and CO۲ on Cu-BDC Metal-Organic Frameworks Synthesized Using Different Solvent Separation Routes
Publish Year: 1399
نوع سند: مقاله ژورنالی
زبان: English
View: 49
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JPSTR-10-3_002
تاریخ نمایه سازی: 30 آذر 1402
Abstract:
Energy storage is one of the major challenges during the last decades. Natural gas adsorption on porous materials has notable advantages in comparison with the other approaches. Due to the lack of adsorption information about Cu-BDC (copper terephthalate), it was synthesized by two different solvent separation procedures and identified using X-ray diffraction (XRD), Brunauer-Emmet-Telller (BET) and thermogravimetric analysis (TGA) techniques. Moreover, equilibrium adsorption measurements were performed for CH۴ and CO۲ gases in the pressure range ۰-۵۰ bar at two various temperatures (۲۹۳ and ۳۲۳ K), and experimental adsorption data were modeled with adsorption isotherms. Also, the sample synthesized by the new solvent separation procedure had ۹۱۸ m۲/gr surface area and ۰.۴۲ cm۳/gr pore volume which were respectively ۴۵% and ۵۰% higher than the traditional method. In addition, this sample has shown CO۲ and CH۴ adsorption capacity (۱۶.۷۲ and ۱۳.۲۳ mmol gr-۱) were desirable in comparison with other conventional Metal-Organic Frameworks (MOFs) and its methane adsorption value was close to DOE (Department of Energy) targets. To investigate the application of the synthesized materials, the selectivity of CO۲/CH۴ was determined by IAST (ideal adsorbed solution theory) according to the sorption test information of the single components. Finally, adsorption enthalpy of the adsorbates on the two samples was computed using the Clausius-Clapeyron equation and the results were in accordance with the isotherms at two various temperatures (۲۹۳ and ۳۲۳ K).
Keywords:
Authors
maryam Khalili
Department of Chemical Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran
ensiyeh ganji
Gas Refining Technologies Division, Research Institute of Petroleum Industry (RIPI), Tehran, Iran
Armin Taheri
Young Researcher and Elites Club, Science and Research Branch, Islamic Azad University, Tehran, Iran
Mahnaz Pourkhalil
Nanotechnology Research Center, Research Institute of Petroleum Industry (RIPI), Tehran, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :