Investigating the Effects of Air Duct Dimensions on Aeration and Hydrodynamic Characteristics of a Surface-piercing Propeller
Publish Year: 1403
نوع سند: مقاله ژورنالی
زبان: English
View: 96
This Paper With 14 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JACM-10-2_013
تاریخ نمایه سازی: 23 اردیبهشت 1403
Abstract:
In this work, considering a propulsion system of a planing boat, the effects of the air ducts with a square cross-section on the thrust, torque, performance, and ventilation of the surface piercing propeller (SPP) are investigated. The fluid flow is simulated using solving of the Reynolds-averaged Navier–Stokes equations (RANS) by the multi-physics computational fluid dynamics software STAR-CCM+. The simulations are validated by studying its grid independency and comparing the numerical results with the extracted results from the sea trial. Then, by considering the actual arrangement of the duct and SPP, the SPP is examined in the open water test in five cases for both condition of the lack and existence of the aeration. Also, the effects of aeration, the advance coefficient and the immersion ratio on the hydrodynamic characteristics of the SPP are studied. In a constant distance between the air duct and propeller, the results show that by increasing the hydraulic diameter of the air duct, the torque and thrust decrease, and the efficiency remains almost constant. Also, it is numerically demonstrated that the effects of the advance coefficient on the torque and thrust coefficients are different for the models with and without aeration.
Keywords:
Authors
Mojtaba Pakian Bushehri
Department of Mechanical Engineering, School of Engineering, Persian Gulf University, Bushehr, ۷۵۱۶۹۱۳۸۱۷, Iran
Mohammad Reza Golbahar Haghighi
Department of Mechanical Engineering, School of Engineering, Persian Gulf University, Bushehr, ۷۵۱۶۹۱۳۸۱۷, Iran
Parviz Malekzadeh
Department of Mechanical Engineering, School of Engineering, Persian Gulf University, Bushehr, ۷۵۱۶۹۱۳۸۱۷, Iran
Ehsan Bahmyari
Department of Marine Engineering, School of Engineering, Persian Gulf University, Bushehr, ۷۵۱۶۹۱۳۸۱۷, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :