CONTROL OF A MULTI-CRACKED TIMOSHENKO BEAM SUBJECT TO A MOVING MASS USING PIEZOELECTRIC ACTUATORS
Publish place: Iranian National Conference on Mechanical Engineering
Publish Year: 1392
نوع سند: مقاله کنفرانسی
زبان: English
View: 920
This Paper With 19 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NCMII01_039
تاریخ نمایه سازی: 22 اردیبهشت 1393
Abstract:
In this paper, the dynamic modeling and control of a multi cracked beam subject to a moving mass is presented. The beam equations of motion are obtained based on the Timoshenko beam theory by including the dynamic effect of a moving mass traveling along a vibrating path. The equations of motion are first discretized by using the assumed modes method. The cracked beam is modeled as numbers of segments connected by two massless springs at the crack locations (one extensional and another one rotational). Considering the compatibility requirements on the crack section, the relationships between any two spans can be obtained. One piezoelectric actuator is then attached along the bottom of the beam. In order to reduce the vibration of the beam under a moving mass, a controller with full state feedback is designed based on linearized equations of motion. Finally, numerical simulations are performed with respect to different conditions such as crack size, type of the beam, and velocities. The controller with a piezoelectric actuator shows excellent performance under a moving mass
Keywords:
Authors
a Ariaei
Department of Mechanical Engineering, Faculty of Engineering, University of Isfahan, Hezar Jerib Ave., Isfahan, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :