Destructive & Non-Destructive Methods for Monobloc-wheel Residual StressMeasurement in Railways and Introduction of the CONTOUR Method
Publish Year: 1392
نوع سند: مقاله کنفرانسی
زبان: English
View: 812
This Paper With 12 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
WMECH02_082
تاریخ نمایه سازی: 21 تیر 1393
Abstract:
Monobloc wheels used in railway transportation must have residual compressive stress. In such a state, any cracks initiated in the wheel surface shall not grow and expand. Residual compressive stress is achieved in the product through heating during production process. The tolerance and distribution behavior for this stress is provided in EN13262 Standard. In this standard, two methods of destructive and non-destructive methods for measuring residual stress are introduced. In the UIC812-3 Regulations, a destructives method for measuring residual stress is provided. An attempt here is made to both examine and explain these methods, their advantages and disadvantages, and their operative setbacks. Also, another approach for measurement called CONTOUR method for use in the study of residual stress distribution in Monobloc wheel is introduced which is more straightforward and accurate and can show the stress in all points of the wheel cross-section whilst having a significant advantage compared to the methods presented by UIC and EN.
Keywords:
Authors
R. S Ashofteh
MSc of Mechanical Engineering
A Mohammadnia
MSc. at metallurgy Engineering Raja Rail transportation Co, Tehran, Iran,
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :