Influences of depth and shape of corrosion pits on the ultimate compressive strength of plate elements
Publish place: international conference on civil engineering, architecture and Urban Sustainable Development
Publish Year: 1392
نوع سند: مقاله کنفرانسی
زبان: English
View: 596
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICCAU01_2965
تاریخ نمایه سازی: 29 تیر 1393
Abstract:
Structural components are prone to corrosion damage. Clearly either general or localized corrosion will reduce the residual strength of ageing structural components. The aim of this paper is to investigate the effects of pitting corrosion on the ultimate capacity of mild steel rectangular plates under uniaxial compression. The elastic-plastic large deflection behavior of the pitted plate has been analyzed by the ABAQUS. The ultimate strength assessment model that is in terms of the corroded volume loss was deduced in theory, and which was then completed through numerical experiment by employing nonlinear finite element analyses for series of corroded plate models. Here, the effects both of shape and depth of corrosion pits in case of total corroded volume loss for each model is same has been discussed, so that the effect of each of the parameters be investigated precisely
Keywords:
Authors
Behnam Aghebati
Department of Civil Engineering, Vali-e-Asr University of Rafsanjan, Iran
Yasser Sharifi
Department of Civil Engineering, Vali-e-Asr University of Rafsanjan, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :