CFD and Experimental Studies on Cone Cap Tray Hydrodynamics
Publish place: 07th International Congress on Chemical Engineering
Publish Year: 1390
نوع سند: مقاله کنفرانسی
زبان: English
View: 678
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC07_273
تاریخ نمایه سازی: 25 فروردین 1394
Abstract:
This paper describes an experimental and CFD investigation into the hydrodynamic behavior of a new type of column tray introduced as cone cap tray which may be used in contactor columns especially in stripping columns. The hydrodynamics of this plate is investigated in an Air-water commercial scale simulator column with an internal diameter of 1.2 m. The experiments and CFD simulation were performed on different operating conditions. The clear liquid height and total pressure drop were measured. The results were compared with valve tray in the same column simulator rig. The totalpressure drop and clear liquid height of cone cap tray are similar to a valve tray having equal open holes area
Keywords:
Authors
Mohammed Rahim Ostadzehi
Chemical Engineering Department, University of Sistan and Baluchestan, Zahedan,
Rahbar Rahimi
Chemical Engineering Department, University of Sistan and Baluchestan, Zahedan,
Babak Jamshidi
Chemical Engineering Department, University of Sistan and Baluchestan, Zahedan,
Taleb Zarei
Chemical Engineering Department, University of Sistan and Baluchestan, Zahedan,P.OBox.۹۸۱۶۴-۱۶۱, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :