Investigating the effect of simultaneous ultrasonic vibration of tool and addition of Carbon Nanotube into the dielectric on machining characteristics and suface integrity of Ti-6Al-4V alloy in EDM process
Publish place: International Conference on Science and Engineering
Publish Year: 1394
نوع سند: مقاله کنفرانسی
زبان: English
View: 623
This Paper With 17 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICESCON01_0474
تاریخ نمایه سازی: 25 بهمن 1394
Abstract:
Carbon nanotubes (CNTs) have been used in various fields of research due to their unique properties. In this study multi-wall carbon nanotubes are added to the dielectric used in the EDM and ultrasonic assisted EDM process to evaluate its performance when machining the Ti-6Al-4V alloy, by means of copper electrodes. The effect of adding CNT powders to the dielectric and applying ultrasonic vibration to tool on the material removal rate, tool wear ratio and surface integrity of the work piece were investigated. It is found that addition of multi-walled carbon nanotubes in dielectric shows significant improvement in machining stability; reduces material removal rate and too wear ratio. Ultrasonic assisted EDM processes increases MRR and TWR. The results clearly showed that addition of CNT particle has decreased the surface roughness and vibration of tool with ultrasonic frequency deteriorates surface roughness. Applying ultrasonic vibration to tool and adding CNT powder to dielectric reduce length and width of surface cracks and depth of metal altered zone. Surface conditions in terms of Surface cracks and metal altered zone are very favorable in CNT added dielectric ultrasonic assisted EDM process
Keywords:
Authors
Mohammadreza shabgard
Department of Mechanical Engineering University of Tabriz Tabriz, Iran
Behnam khosrozadeh
Department of Mechanical Engineering University of Tabriz Tabriz, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :