Studies on the Morphology and mechanical Properties of PP/EPDM blend reinforced with talc powder
Publish place: یازدهمین سمینار بین المللی علوم و تکنولوژی پلیمر
Publish Year: 1393
نوع سند: مقاله کنفرانسی
زبان: English
View: 426
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISPST11_446
تاریخ نمایه سازی: 6 اردیبهشت 1396
Abstract:
In this study, mixing methods effects on morphology and mechanical properties of polypropylene/ethylene-propylene-dien rubber (PP/EPDM) tough thermoplastic blend that reinforced with talc powder were investigated. Blends were prepared by different methods in internal mixer and twin-screw extruder. This evaluation showed that the morphological and mechanical properties of samples changed by the different mixing methods. The results show improvement of blend s mechanical properties when more part of talc incorporated in rubber phase. It is inferred from the mechanical properties that in the internal mixer; izod impact strength is higher when EPDM and talc compound is firstly prepared on two-roll mill and mixed with PP
Keywords:
Authors
Hamid Yazdani
Department of chemical engineering, Payame Noor University, PO BOX 19395-3697 Tehran, IRAN
Ismail Ghasmi
Iran Polymer and Petrochemical Institute, P.O. Box: 14965-115, Tehran, Iran; Fax: +98-21-44580021
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :