سیویلیکا را در شبکه های اجتماعی دنبال نمایید.

DETERMINATION OF FLEXURAL STRENGTH OF STEEL FIBER REINFORCED CONCRETE WITH DIFFERENT FIBER PERCENTAGE BY MEANS OF 3-POINT BENDING TEST

Publish Year: 1388
Type: Conference paper
Language: English
View: 2,062

This Paper With 10 Page And PDF Format Ready To Download

Export:

Link to this Paper:

Document National Code:

ICCD03_005

Index date: 11 October 2008

DETERMINATION OF FLEXURAL STRENGTH OF STEEL FIBER REINFORCED CONCRETE WITH DIFFERENT FIBER PERCENTAGE BY MEANS OF 3-POINT BENDING TEST abstract

Nowadays, many buildings and infrastructures are made of concrete and therefore, strength of concrete structural members ensures longer useful life and serviceability of the structure. Beams are one of the most important structural members that must have sufficient load bearing and ductility. Since brittle behavior and low ductility are two noticeable drawbacks of concrete members, they should be reinforced by materials with higher ductility and tensile strength such as steel fibers which can significantly improve these two characteristics of bending members. With this respect, use of industrial steel fiber deposits, percentage of fibers and optimized amount of fibers are critical factors which affect the flexural strength of beams and cost-effectiveness of the projects. In this paper, experimental results of 3-point bending tests carried out on fiber reinforced concrete beams with different percentage of fibers are presented and compared and also its cost-effectiveness has been considered.

DETERMINATION OF FLEXURAL STRENGTH OF STEEL FIBER REINFORCED CONCRETE WITH DIFFERENT FIBER PERCENTAGE BY MEANS OF 3-POINT BENDING TEST Keywords:

DETERMINATION OF FLEXURAL STRENGTH OF STEEL FIBER REINFORCED CONCRETE WITH DIFFERENT FIBER PERCENTAGE BY MEANS OF 3-POINT BENDING TEST authors

M Hajisotude

Assistant professor, Power and Water University of Technology, Tehran

M Jalal

M.Sc. Student, Dept of civil Engg. School of Engg. Razi University, Kermanshah

M.M Raouffard

B.Sc. civil engineer, Power and Water University of Technology, Tehran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
Concrete and Aggregates. 1988. Annual Book of ASTM Standards, Part ...
Concrete International; 4state of art report On fiber reinforced concrete ...
ACI Committee 440. 1996. State-of- the-Art Report on Fiber Reinforced ...
ACI Committee 544. 1982. Sta te-of-the-Art Report on Fiber Reinforced ...
Hasani.A. 2000. Effect of steel fibers in controlling of tensile ...
Keivani.A. 1992. principles and technology of still fiber reinforced concrete, ...
نمایش کامل مراجع