سیویلیکا را در شبکه های اجتماعی دنبال نمایید.

APPLICATION OF FIBER REINFORCED PLASTICS FOR CONCRETE T-BEAM BRIDGE STRENGTHENING

Publish Year: 1388
Type: Conference paper
Language: English
View: 2,305

This Paper With 6 Page And PDF Format Ready To Download

Export:

Link to this Paper:

Document National Code:

ICCD03_071

Index date: 11 October 2008

APPLICATION OF FIBER REINFORCED PLASTICS FOR CONCRETE T-BEAM BRIDGE STRENGTHENING abstract

A strengthening method using fiber reinforced plastics (FRP) has been widely applied for deteriorated reinforced concrete bridges. Advantages of this method may include that the strengthened structures do not increase dead weight and that no corrosion is concerned. From various experimental studies, behavior characteristics of the FRP strengthened structural members have been generally well evaluated. The majority of those studies, however, have been performed on laboratory sized structural members rather than actual full scale bridges. The study herein used a full scale actual deteriorated bridge to evaluate the strengthening effects with three different FRP materials, carbon fiber sheet, glass fiber reinforced plastics and aramid fiber sheet. In the field load tests, concrete weight blocks were used as a loading system instead of commonly used a live-truck load or hydraulic jacking force. The strengthening was designed as specified in ACI 440.1R which is based on the ultimate strength design concept. From the measured behaviors, it was confirmed that the strengthening using FRP materials successfully improved the flexural capacity of the aged and deteriorated concrete bridge. The strengthened girders behaved linearly up to the design moment even though the applied stress distribution mechanisms were different depending on the FRP materials. Therefore, it is concluded that the strengthening design method specified in ACI 440.1R can be successfully used for actual full scale bridges strengthened with external FRP bonding.

APPLICATION OF FIBER REINFORCED PLASTICS FOR CONCRETE T-BEAM BRIDGE STRENGTHENING Keywords:

APPLICATION OF FIBER REINFORCED PLASTICS FOR CONCRETE T-BEAM BRIDGE STRENGTHENING authors

K Siamardi

Civil Engineer, Concrete Research Center, Atisaz Company

A.A Mounesan

Civil Engineer, Sharif University of Technology, Head Manager of Atisaz Company

M.M Khodavirdi Zanjani

Civil Engineer, Concrete Research Center, Atisaz Company

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
Sim, J. S tand ardization of Rep air/Rehab ilitation of ...
Oh, H., Sim, J., and Meyer, _ Experimental Assessment of ...
Oh, H., and Sim, J. Interface Debonding Failure in Beams ...
Sim, J., and Oh, H. Experimental Study of Strengthening Technique ...
Quantril, R. J., Hooaway, L. C., and Tbrone, A. M. ...
Smith, S. T., and Teng, J. G. FRP- Strengthened RC ...
Smith, S. T., and Teng, J. G. FRP- Strengthened RC ...
Oh, B., Kim, K., You, Y., and You, D. Ultimate ...
Sim, J., and Moon, D. Y. A Proposal for Structural ...
American Concrete Institute Committee 440.1R-01. Guide for the Design and ...
نمایش کامل مراجع