سیویلیکا را در شبکه های اجتماعی دنبال نمایید.

Hydrodesulfurization of Model Naphtha using NiMo/Al2O3 Nanocatalyst Prepared by Supercritical Deposition

Publish Year: 1388
Type: Conference paper
Language: English
View: 2,888

This Paper With 5 Page And PDF Format Ready To Download

Export:

Link to this Paper:

Document National Code:

ICHEC06_309

Index date: 23 September 2009

Hydrodesulfurization of Model Naphtha using NiMo/Al2O3 Nanocatalyst Prepared by Supercritical Deposition abstract

The synthesis of NiMo/Al2O3 nanocatalyst (NiMo-SCF; 3.2 wt% Ni and 8.2 wt% Mo) via supercritical CO2–methanol deposition and conventional wet co-impregnation (NiMo-IMP; 3.1 wt% Ni and 8.3 wt% Mo) was investigated. The characterization of both catalysts by adsorption–desorption of nitrogen, oxygen chemisorptions and XRD indicated that Ni and Mo highly dispersed on the Al2O3 support. The hydrodesulfurization of fuel model compound, dibenzothiophene, was used in the evaluation of the NiMo-SCF catalyst versus the commercial catalyst (NiMo-COM; 2.2 wt% Ni and 9.3 wt% Mo). The results of activity of the NiMo-SCF nanocatalyst in the hydrodesulfurization of dibenzothiophene demonstrated higher conversion for the NiMo-SCF nanocatalyst in contrast to commercial catalyst. The kinetic analysis of thereaction data was carried out to calculate the reaction rate constant of the synthesized and commercial catalysts in the temperature range of 543-603 K. The reaction rate constants at 603 K for the NiMo-SCF nanocatalyst and the NiMo- COM one were calculated to be 4.96*10-5 and 2.42*10-5 (mol /g cat. min), respectively. Moreover, the newly developed nanocatalyst is less inhibited than the commercial catalyst by aromatics such as toluene.

Hydrodesulfurization of Model Naphtha using NiMo/Al2O3 Nanocatalyst Prepared by Supercritical Deposition Keywords:

Hydrodesulfurization of Model Naphtha using NiMo/Al2O3 Nanocatalyst Prepared by Supercritical Deposition authors

M Alibouri

Catalysis Research Center, Research Institute of Petroleum Industry, Tehran ۱۸۷۴۵-۴۱۶۳, Iran

H . R Aghabozorg

Catalysis Research Center, Research Institute of Petroleum Industry, Tehran ۱۸۷۴۵-۴۱۶۳, Iran

S . M Ghoreishi

Department of Chemical Engineering, Isfahan University of Technology, Isfahan ۸۴۱۵۶-۸۳۱۱۱, Iran

F Abolhassani Nejad

Department of Chemical Engineering, Isfahan University of Technology, Isfahan ۸۴۱۵۶-۸۳۱۱۱, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
Alibouri, M., Ghoreishi, S.M., and Aghabozorg, H.R., _ Hydrode sulfurization ...
thermodynamic _ _ _ _ Conf. on Nanostructure, Kish, Iran, ...
Steiner, P., and Blekkan, E.A..Catalytic h ydr od esulfurization of ...
Silva-Rodrigo, R., Caldero n -Salasa, C., Melo-Bandaa, J.A., Dom nguezb, ...
_ Herrera, J.M., Reyes, J., Roquero, P., and Klimova, T., ...
نمایش کامل مراجع