Study of the Effect of Lubricant’s Type on the Construction Hard Rocks’ Cutting Performance from the Energy Consumption’s Perspective
Publish Year: 1397
نوع سند: مقاله کنفرانسی
زبان: English
View: 586
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ARCHITECTUREUR02_144
تاریخ نمایه سازی: 5 آبان 1397
Abstract:
The process of cutting rocks is an abrasive process in which a huge amount of energy loss takes place due to thermal stresses, and is intensified with the increase of hardness, abrasion and resistance parameters. To improve and increase the efficiency of the cutting process and also reduce forces in the process, the produced thermal stresses must be minimized in order to increase the quality of the cut surface and also enhance the instrument’s life span. One of the most important strategies for achieving this purpose is to use an appropriate coolant and lubricant fluid in the cutting environment. In the present research, it was attempted to study the effect of lubricant’s type on the construction hard rocks’ cutting performance from the energy consumption’s perspective. For this reason, after constructing a cutting machine at an experimental scale, 48 tests at different operational conditions were conducted using three lubricant fluids, including lubricant & coolant powder and two types of soap water with ratios of 1 to 40 and 1 to 20. During each test, the machine’s consumed ampere was measured and recorded. Results obtained from studies showed that the amount of ampere consumption in the cutting machine was the lowest when using the lubricant fluid of lubricant & coolant powder, so that the use of lubricant & coolant powder as a lubricant fluid leads to 30% reduction in the ampere consumption
Keywords:
Authors
Seyed Mehdi Hosseini
Faculty of Mining, Petroleum & Geophysics, Shahrood University of Technology, Shahrood, Iran
Mohammad Ataei
Faculty of Mining, Petroleum & Geophysics, Shahrood University of Technology, Shahrood, Iran
Reza Khalokakaei
Faculty of Mining, Petroleum & Geophysics, Shahrood University of Technology, Shahrood, Iran
Reza Mikaeil
Department of Mining and Metallurgical Engineering, Urmia University of Technology, Urmia, Iran