Determination of tetracycline by adsorptive differential pulse cathodic stripping voltammetry
Publish place: 20th Iranian Chemical Congress
Publish Year: 1397
نوع سند: مقاله کنفرانسی
زبان: English
View: 289
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IRANCC20_008
تاریخ نمایه سازی: 28 اردیبهشت 1398
Abstract:
A novel type of Pb-polyaminophenol filmed glassy carbon electrode for adsorptive cathodic stripping analysis of trace amounts of tetracycline was developed. The Pb-polymer electrode was fabricated in situ by simultaneous electrodeposition of Pb and cathodic electropolymerization of 4-nitrophenol in a sodium acetate medium at -1.5 volt.The outputs of some experiments showed that tetracycline can be adsorbed on the surface of this Pb-polymer filmed electrode in an open circuit condition. Therefore it was used in adsorptive cathodic stripping analysis of tetracycline. Among new kinds of environmental contaminants, tetracyclines (TCs) are referred to as modern pollutants, since they have been found in soil and aquatic media [1].These compounds are routinely used for human therapy and in the livestock industry [2]. The response of the electrode was enhanced in the presence of cetyltrimethylammonium bromide. Some parameters affecting the performance of the electrode were studied and optimized. The response of the electrode was linear in the range of 5×10-8 - 1×10-5 mol L-1 of tetracycline with a correlation coefficient of 0.9981. The relative standard deviation for 5×10-7 mol L-1 of tetracycline was 1.8 % (n=5). The L.O.D and L.O.Q were 4×10-9 and 1.3×10-8 mol L-1 of tetracycline, respectively. The introduced electrode was used for determination of tetracycline residues in some samples and the obtained results were in good agreement with the results of HPLC
Authors
Zeinab Rajab Dizavandi
Department of applied chemistry, Kusar University of Bojnord, Iran
Alireza Aliakbar
Department of chemistry, Faculty of Science, University of Guilan, Rasht, Iran
Mehdi Sheykhan
Department of chemistry, Faculty of Science, University of Guilan, Rasht, Iran