Publisher of Iranian Journals and Conference Proceedings

Please waite ..
CIVILICAWe Respect the Science
Publisher of Iranian Journals and Conference Proceedings
عنوان
Paper

Synthesis of Al-Ti-B Master Alloy by SHS Method and Investigation of the Effect of Master Alloy Produced on Grain Size and Hardness of Aluminum Alloy

تعداد صفحات: 1 | تعداد نمایش خلاصه: 102 | نظرات: 0
سال انتشار: 1397
کد COI Paper: IIAC05_011
زبان Paper: Englishglish
نسخه کامل Paper در کنفرانس ارائه نشده است و در دسترس نیست.

مشخصات نویسندگان Paper Synthesis of Al-Ti-B Master Alloy by SHS Method and Investigation of the Effect of Master Alloy Produced on Grain Size and Hardness of Aluminum Alloy

Hadi Pourbagheri - Materials Engineering Department, University of Tabriz, Tabriz, Iran
Mohammad Roostaei - Materials Engineering Department, University of Tabriz, Tabriz, Iran
Hossein Aghajani - Materials Engineering Department, University of Tabriz, Tabriz, Iran

چکیده Paper:

In this study Al-Ti-B master alloy was produced by self-propagation high temperature synthesis (SHS) from elemental powder compacts. The heat required to initiate reactions in the SHS process was provided by electrical arc. The elemental powders were mixed together to form final master alloys containing about 20, 25 and 30 mole % TiB2. X-ray diffraction analysis (XRD) was used to identify the phases formed in the master alloy and the resulted alloy. The master alloys mainly consist of TiAl, Ti3Al and TiB2 phases. Scanning electron microscopy (SEM) was used to observe the morphology of the second phase particles in the master alloy. TiB2 particles morphology was hexagonal and tetragonal. TiB2 particles were agglomerated and formed clusters. Also, needle like morphology was observed for TiB2 particles. The amount of 0.2 wt % of master alloys was added to aluminum alloy. Optical microscopy (OM) was used to observe the microstructure of the alloy. Optical microscopy images were analyzed using Clemex Vision software to determine the ASTM grain size number (G) of the alloy with and without master alloy, as well as the estimated percent of intermetallic compounds. The highest G (13.39) was found in the reference alloy and the lowest G (12.36) was found in the alloy containing 30% TiB2. Energy dispersive x-ray spectroscopy (EDS) was used to determine the chemical composition of the intermetallic compounds formed in the aluminum alloy. The hardness of the alloy increased and then decreased with increasing TiB2. The hardness of the specimen containing master alloy with 25 mole % TiB2 (97.64HV0.05) was higher than that of other specimens

کلیدواژه ها:

Al-Ti-B Master Alloy ; SHS ; Electrical arc ; Aluminum Alloy

کد Paper/لینک ثابت به این Paper

برای لینک دهی به این Paper می توانید از لینک زیر استفاده نمایید. این لینک همیشه ثابت است و به عنوان سند ثبت Paper در مرجع سیویلیکا مورد استفاده قرار میگیرد:

https://civilica.com/doc/897740/

کد COI Paper: IIAC05_011

نحوه استناد به Paper:

در صورتی که می خواهید در اثر پژوهشی خود به این Paper ارجاع دهید، به سادگی می توانید از عبارت زیر در بخش منابع و مراجع استفاده نمایید:
undefined, undefined و undefined, undefined و undefined, undefined,1397,Synthesis of Al-Ti-B Master Alloy by SHS Method and Investigation of the Effect of Master Alloy Produced on Grain Size and Hardness of Aluminum Alloy,پنجمین کنفرانس بین المللی آلومینیوم ایران,Tehran,,,https://civilica.com/doc/897740

در داخل متن نیز هر جا که به عبارت و یا دستاوردی از این Paper اشاره شود پس از ذکر مطلب، در داخل پارانتز، مشخصات زیر نوشته می شود.
برای بار اول: (1397, Pourbagheri, Hadi؛ Mohammad Roostaei و Hossein Aghajani)
برای بار دوم به بعد: (1397, Pourbagheri؛ Roostaei و Aghajani)
برای آشنایی کامل با نحوه مرجع نویسی لطفا بخش راهنمای سیویلیکا (مرجع دهی) را ملاحظه نمایید.

Research Info Management

Certificate | Report Paper

Export Citation info of this Paper to research management softwares

علم سنجی و رتبه بندی Paper

مشخصات مرکز تولید کننده این Paper به صورت زیر است:
نوع مرکز: state university
تعداد مقالات: 17,570
در بخش علم سنجی پایگاه سیویلیکا می توانید رتبه بندی علمی مراکز دانشگاهی و پژوهشی کشور را بر اساس آمار مقالات نمایه شده مشاهده نمایید.

New RelatedPapers

Share this paper

WHAT IS COI?

COI is a national code dedicated to all Iranian Conference and Journal Papers. the COI of each paper can be verified online.

Support