سمتهای علمی و اجرایی در دانشگاهها و مراکز علمی کشور
ISI Papers
- "Effects of Induction and Convention Aging on Growth Kinetics and Distribution of Nanometric γʹ Precipitates in an Ni-Based Superalloy", AIP, (2007), Vol , No :
- "Mechanical behavior modeling of nanocrystalline NiAl compound by a feed-forward back-propagation multi-layer perceptron ANN", Elsevier BV, (2009), Vol 44, No 4: 1231-1235
- "Influence of Etchants on Quantitative/Qualitative Evaluations of the γ′ Precipitates in a Nickel-Base Superalloy", Springer Science and Business Media LLC, (2012), Vol 1, No 6: 290-296
- "Effect of pouring temperature and casting thickness on distribution gradient of<i>in situ</i>formed Al<sub>2</sub>Cu particles during centrifugal casting of hypereutectic Al–Cu alloy", Maney Publishing, (2013), Vol 27, No 3: 129-134
- "Characterization of mechanically alloyed nano structured Fe3Al intermetallic compound by X-ray diffractometry", Elsevier BV, (2015), Vol 26, No 3: 797-801
- "Effect of Stress-Induced Phase Transformation on the Fracture Toughness of Fe3Al Intermetallic Reinforced with Yttria-Partially Stabilized Zirconia Particles", Springer Science and Business Media LLC, (2017), Vol 48, No 10: 5046-5058
- "Cu-bearing, martensitic stainless steels for applications in biological environments", Elsevier BV, (2017), Vol 130, No : 442-451
- "Centrifugal casting of in-situ Al-Mg<sub>2</sub>Si<sub>(1-x)</sub>Sn<sub>x</sub> composites: a study of radial segregation", Informa UK Limited, (2018), Vol 32, No 2: 114-121
- "Optimization of Centrifugal Casting Parameters to Produce the Functionally Graded Al–15wt%Mg2Si Composites with Higher Tensile Properties", Springer Science and Business Media LLC, (2019), Vol 14, No 4: 937-948
- "Interfacial reactions in actively brazed Cu-Al<sub>2</sub>O<sub>3</sub> composites and copper using a newly developed Cu-Sn-Ag-Ti filler alloy", Informa UK Limited, (2023), Vol , No : 1-11
Conference Papers
- Dissimilar brazing of cemented carbide to steel using a pure copper asfiller metal ارائه شده در 5th International Conference on Welding and Non Destructive Testing & 23rd National Conference on Welding & Inspection & 12th National Conference on NDT (1401)
- تاثیر عملیات بازپخت پوشش کروم سخت فولاد کروم- نیکل- مولیبدن دار (VCN۲۰۰) بر سختی و مقاومت به سایش پوشش ارائه شده در 21st National Conference on Surface Engineering (1399)
- Joining ceramics to metals by a newly designed Cu-base active filler alloy ارائه شده در The 6th International Conference on Exhibitiion on Metallurgy and Materials Engineering (1396)
- رفتار خوردگی آلیاژهای Cu-xZn جوشکاری همزن اصطکاکی شده درمحیط کلریدی ارائه شده در 10th joint meeting of the 5th International Conference on Materials and Metallurgical Engineering Society and Iranian Foundry Society (1395)
- تاثیر تغییر کاربری اراضی طبیعی بر پراکنش مکانی عناصر غذایی خاک ارائه شده در 3rd National Conference on Science and Environmental Management (1395)
- راهکارها و روش های کاربردی برای مقابله با بحران کم آبی ارائه شده در National Conference on Water Crisis in Iran and the Middle East (1394)
- بررسی ریزساختار و سختی کامپوزیت درجای Al-13.8wt.%Mg2Si ساخته شده به روش ریخته گری گریز ازمرکز ارائه شده در 09th Iranian Ceramic Congress (1392)
- هدفمند سازی ریزساختار و خواص مکانیکی برنز آلومینیم به روش ریخته گری گریز از مرکز ارائه شده در 1st International and 6th Joint Conference of Iranian Society of Metallurgical Engineers and the scientific community of Casting (1391)
- تأثیر مقدار آهن بر رفتار فیزیکی و مکانیکی آلیاژ آلومینیم ۶١ ارائه شده در 1st International and 6th Joint Conference of Iranian Society of Metallurgical Engineers and the scientific community of Casting (1391)
- بررسی تغییرات درجه بندی شده ریزساختار و خواص مکانیکی آلیاژ ریختگی هدفمندCu-11wt.%Alبا عملیات حرارتی ارائه شده در 1st International and 6th Joint Conference of Iranian Society of Metallurgical Engineers and the scientific community of Casting (1391)
- بررسی عیوب و وابستگی آنها به پارامترهای جوشکاری همزن اصطکاکی مس خالص ارائه شده در 1st International and 6th Joint Conference of Iranian Society of Metallurgical Engineers and the scientific community of Casting (1391)
- شناسایی و تحلیل فازی ترکیب نانوساختارFe3Alسنتز شده به روش آلیاژسازی مکانیکی به کمک پراش اشعهX ارائه شده در 1st International and 6th Joint Conference of Iranian Society of Metallurgical Engineers and the scientific community of Casting (1391)
- ایجاد ریزساختار درجه بندی شده هدفمند در آلیاژ یوتکتیکAl-13.8 wt.% Mg2Si با اضافه کردن آمیژان Al-5Ti-B در ریخته گری گریز از مرکز ارائه شده در 1st International and 6th Joint Conference of Iranian Society of Metallurgical Engineers and the scientific community of Casting (1391)
- Effect of Magnesium and Silicon Concentration on Elongation and Electrical Conductivity of 6101 Aluminum Alloy ارائه شده در Iran International Aluminum Conference (1391)
- تاثیر پیر سازی تحت کرنش کششی الاستیک بر روی سختی و خواص کششی آلیا ژ آلومینیم 2024 ارائه شده در 3rd Conference in the Manufacturing Engineering (NMEC2012) (1390)
- Non-Isothermal Hot Deformation Behavior of Extrude and Cast AA 2024 Aluminum Alloys ارائه شده در 12th Iranian Conference on Manufacturing Engineering (ICME 2010) (1390)
- بررسی سینتیک انحلال مورفولوژیهای مختلف رسوبات در سوپر آلیاژ پایه نیکل IN738LC ارائه شده در The fourth joint conference of the Association of Metallurgical Engineers and the Iranian Foundry Association (1389)
- جهت گیری مرجح رسوبات در سوپرآلیاژ پایه نیکل IN738LC ارائه شده در The fourth joint conference of the Association of Metallurgical Engineers and the Iranian Foundry Association (1389)
- تاثیر نرخ سرمایش بر میزان عدم انطباق شبکه ϓ-ϒ و مورفولوژی رسوبات ϓ در سوپر آلیاژ پایه نیکل Udimet500 ارائه شده در The fourth joint conference of the Association of Metallurgical Engineers and the Iranian Foundry Association (1389)
- ایجاد ریز ساختار هدفمند در آلیاژ هیپویوتکتیک Al- 11wt.% Mg2Si با استفاده از روش ریخته گیری گریز از مرکز ارائه شده در The fourth joint conference of the Association of Metallurgical Engineers and the Iranian Foundry Association (1389)
- رشد دندریتی رسوبات γ′ در یک سوپر آلیاژ پایه نیکل ارائه شده در 09th Iranian Seminar on Surface Engineering (1387)
- تدوین دانش فنی ریخته گری سگمنت نازل ردیف اول توربین گازی 25 مگاواتی ارائه شده در 21st International Power System Conference (1385)
- بررسی تاثیر پارامترهای کوئنچ باهوای مرطوب برریزساختار و خواص مکانیکی فولاد AISI4130 ارائه شده در 1st Congress of the Iranian Metallurgical Society (1376)
Journal Papers
- انحلال آندی سوپرآلیاژ پایه نیکل مستعمل U-۵۰۰ در محیط سولفاتی برای بازیابی نیکل، کبالت و کروم منتشر شده در Journal of Metallurgical and Materials Engineering (1401)
- شناسایی جنس و فن فراوری جام مکشوفه در گورستان چالادئم شال خلخال-اردبیل منتشر شده در JOURNAL OF RESEARCH ON ARCHAEOMETRY (1400)
- اثر مقدار منیزیم بر ریزساختار و سختی مدرج کامپوزیت های Al-۲۰Si-XMg ریخته گری شده با روش گریز از مرکز منتشر شده در Founding Research Journal (1398)
- تاثیر افزودن مس بر ریزساختار، سختی و خواص پادمیکروبی فولاد زنگ نزن مارتنزیتی (410s) منتشر شده در Advanced materials and technologies (1397)
- ایجاد ریزساختار هیبریدی مدرج با ریخته گری گریز از مرکز یک آلیاژ هایپریوتکتیک Al-Mg۲Si منتشر شده در Founding Research Journal (1397)
- واکاوی جنبههایی از متالورژی باستانی دشت قزوین بر مبنای دادههای فلزی مکشوفه از قبور عصر آهنII قبرستان سگزآباد منتشر شده در Archaeological Studies (1396)
- تاثیر مقدار سیلیسیم بر درجه بندی ریزساختار آلیاژهای Al-Si ریخته شده به روش گریز از مرکز منتشر شده در Founding Research Journal (1396)
- تاثیر افزودن آهن بر ریزساختار درجه بندی شده کامپوزیت Al-۱۳.۸ wt.%Mg۲Si در ریخته گری گریز از مرکز منتشر شده در Metallurgical Engineering (1394)
- تاثیر افزودن جوانه زای Al-۵Ti-B بر درجه بندی ریزساختار استوانه ریخته شده از کامپوزیت Al-۱۳.۸ wt.% Mg۲Si به روش ریخته گری گریز از مرکز منتشر شده در Journal of Advanced Materials in Engineering (1394)
- محاسبه کرنش الاستیک هم سیمایی برای مورفولوژی های مختلف رسوبات ’γ در یک سوپر آلیاژ پایه نیکل منتشر شده در Journal of Advanced Materials in Engineering (1391)
- تاثیر نرخ سرمایش بر رسوب گذاری γ′در آلیاژ Ni-۱۱.۶at.%Al منتشر شده در Journal of Advanced Materials in Engineering (1389)
- ایجاد ریزساختار هدفمند در آلیاژ هیپویوتکتیک Al-۱۱ wt.% Mg۲Si با استفاده از روش ریخته گری گریز از مرکز منتشر شده در Journal of New Materials (1389)