study of a single bubble inside the venturi tube
Publish Year: 1398
نوع سند: مقاله کنفرانسی
زبان: English
View: 640
This Paper With 10 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CEUCONF06_0476
تاریخ نمایه سازی: 24 شهریور 1398
Abstract:
The purpose of this paper is to study numerical analysis of the motion of a single bubble inside the venturi tube, collapse and shrink of it and formation of micro-nano bubble, using Computational Fluid Dynamics (CFD) technique. To study two-phase flow, venturi tube were modeled in Gambit software and for analyzing model OpenFOAM software that is open source has been used. From among many methods available for modeling the turbulent flow, the standard k-ε method has been used to model turbulent flow. To study two phase flow, the VOF method is used. Finite Volume method (FVM) is used for simulation. Pressure and velocity distribution, and Alpha (Void fraction) were calculated. Results show that large bubbles in the throat section are affected by intense turbulence and become deformed, and collapse after entering the diffusion section. Results show that the bubble, after exiting throat, enters diffusion section of venturi tube and when the venturi tube’s cross section gradually increases, flow speed starts to decline, and pressure increases, cavitation happens and large bubbles break into smaller bubbles. Bubbles deform as soon as they enter diffusion section and collapse there
Authors
Mahin Ghannadi
Ph.D. Student of Hydraulic Structures, Shahrood University of Technology, Shahrood, Iran
S.Fazlolah saghravani
Associate Professor, Department of Civil Engineering, Shahrood University of Technology, Shahrood, Iran
Hamid Niazmand
Professor, Department of Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran