DETERMINATION OF SEISMIC BEARING CAPACITY AND FAILURE MECHANISMS FOR SHALLOWS PLACED ADJACENT TO SLOPES
Publish Year: 1398
نوع سند: مقاله کنفرانسی
زبان: English
View: 524
This Paper With 7 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
SEE08_049
تاریخ نمایه سازی: 27 خرداد 1399
Abstract:
In this paper, an analytical method is developed for calculating ultimate bearing capacity of foundations adjacent to slopes. This subject is highly dependent on the slope geometry and soil properties. Seismic forces are applied to the soil mass, soil surcharge and foundation by pseudo-static forces. In this study, a rigorous assessment of the seismic bearing capacity is performed using an upper-bound limit state plasticity framework known as discontinuity layout optimization (DLO), which makes few prior assumptions concerning the failure geometry. The results show that soil properties, slope configuration, and pseudostatic seismic loading all influence the realized failure mechanism and associated bearing capacity. The use of bearing capacity coefficients that fit within the conventional superposition method may underestimate limit loads when the underlying soil provides a relative increase in resistance but may greatly overestimate bearing capacity when the self-weight of the soil is destabilizing in nature. A set of design charts using direct computational methods for a variety of geometric, geotechnical and seismic conditions is provided. The main objective of this technical note is to explore the influence of horizontal pseudostatic seismic coefficients on the failure mechanism and the ultimate load for footings located near slopes. The suitability of bearing capacity factors compatible with the superposition method for analysing the capacity of footings near slopes subject to seismic conditions is discussed. Finally, a set of design charts is presented.
Keywords:
Authors
Mojtaba Mousavi
M.Sc. Student of Geotechnical Engineering, Department of Civil Engineering, Qom University of Technology, Iran
Morteza Jiryaei
Assistant Professor of Geotechnical Engineering, Department of Civil Engineering, Qom University of Technology, Iran
Aydin Yari Ilkhchi
M.Sc. Student of Geotechnical Engineering, Istanbul Technical University, Istanbul, Turkey
Zeynab Mahdavi
M.SC. Graduate of Earthquake Engineering, Semnan University, Semnan, Iran