Evaluation of Quasi-Two - Dimensional Integral Surface Sound Simulation Methood
Publish place: 10th International Conference on Acoustics and Vibration
Publish Year: 1399
نوع سند: مقاله کنفرانسی
زبان: English
View: 221
This Paper With 10 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISAV10_071
تاریخ نمایه سازی: 18 اسفند 1399
Abstract:
In this research a quasi-two-dimensional integral surface method able to simulate the acoustic domains is evaluated. The Farassat integral surface model which needs three-dimensional da-ta is used, but the data are generated by coherent replication of two-dimensional data along the third dimension. To evaluate the method, a two-dimensional monopole is employed as the acoustic source and its data is replicated. It is observed that the acoustic pressure wave simu-lated by this method, converges to the results of two-dimensional monopole by the increase of replication length. Indeed, the pressure signal has on oscillatory behaviour by the increase of replication length while loses its amplitude during each cycle. The effects of acoustic source frequency, Mach number, location and distance of observer on the trend of conver-gence are investigated. Based on the results, a method to specify a suitable replication length able to simulate the pressure waves with a very good accuracy is introduced.
Keywords:
Authors
Alireza Maleki
Assistant Professor, Mechanical and Energy Engineering Department, Shahid Beheshti University, A. C., Tehran, Iran
Majid Mesbah
Assistant Professor, Mechanical and Energy Engineering Department, Shahid Beheshti University, A. C., Tehran, Iran
Arman Mohseni
Assistant Professor, Mechanical and Energy Engineering Department, Shahid Beheshti University, A. C., Tehran, Iran