سیویلیکا را در شبکه های اجتماعی دنبال نمایید.

Login
PapersConferencesJournals

Stress Concentration Factors in Uniplanar Tubular KT-Joints of Jacket Structures Subjected to In-Plane Bending Loads

Publish place: International Journal of Maritime Technology، Vol: 5، Issue: 1
Publish Year: 1394
Type: Journal paper
Language: English
View: 262

This Paper With 13 Page And PDF Format Ready To Download

DOWNLOAD Paper

Export:

Link to this Paper:
https://civilica.com/doc/1397083

Document National Code:

JR_IJMTE-5-1_003

Index date: 12 February 2022

Stress Concentration Factors in Uniplanar Tubular KT-Joints of Jacket Structures Subjected to In-Plane Bending Loads abstract

In the present research, data extracted from the stress analysis of 46 finite element models, verified using test results obtained from an experimental investigation, were used to study the effect of geometrical parameters on the chord-side stress concentration factors (SCFs) of central and outer braces in uniplanar tubular KT-joints of offshore structures subjected to four different types of in-plane bending (IPB) loads. Parametric study was followed by a set of the nonlinear regression analyses to develop SCF parametric equations for the fatigue analysis and design of uniplanar tubular KT-joints under IPB loadings.

Stress Concentration Factors in Uniplanar Tubular KT-Joints of Jacket Structures Subjected to In-Plane Bending Loads Keywords:

Fatigue , Offshore jacket structure , Tubular KT-joint , Stress concentration factor (SCF) , In-plane bending (IPB)

Stress Concentration Factors in Uniplanar Tubular KT-Joints of Jacket Structures Subjected to In-Plane Bending Loads authors

Hamid Ahmadi

University of Tabriz

Ali Ziaei Nejad

University of Tabriz

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
Kuang, J.G., Potvin, A.B. and Leick, R.D., (۱۹۷۵), Stress concentration ...
Wordsworth, A.C. and Smedley, G.P., (۱۹۷۸), Stress concentrations at unstiffened ...
Wordsworth, A.C., (۱۹۸۱), Stress concentration factors at K and KT ...
Efthymiou, M. and Durkin, S., (۱۹۸۵), Stress concentrations in T/Y ...
Efthymiou, M., (۱۹۸۸), Development of SCF formulae and generalized influence ...
Hellier, A.K., Connolly, M. and Dover, W.D., (۱۹۹۰), Stress concentration ...
Smedley, P. and Fisher, P., (۱۹۹۱), Stress concentration factors for ...
UK Health and Safety Executive, (۱۹۹۷), OTH ۳۵۴: stress concentration ...
Karamanos, S.A., Romeijn, A., Wardenier, J., (۲۰۰۰), Stress concentrations in ...
Gho, W.M. and Gao, F., (۲۰۰۴), Parametric equations for stress ...
Gao, F., (۲۰۰۶), Stress and strain concentrations of completely overlapped ...
Gao, F., Shao, Y.B. and Gho, W.M., (۲۰۰۷), Stress and ...
Morgan, M.R. and Lee, M.M.K., (۱۹۹۸), Parametric equations for distributions ...
Morgan, M.R. and Lee, M.M.K., (۱۹۹۸), Prediction of stress concentrations ...
Chang, E. and Dover, W.D., (۱۹۹۹), Prediction of stress distributions ...
Chang, E. and Dover, W.D., (۱۹۹۹), Parametric equations to predict ...
Shao, Y.B., (۲۰۰۴), Proposed equations of stress concentration factor (SCF) ...
Shao, Y.B., (۲۰۰۷), Geometrical effect on the stress distribution along ...
Shao, Y.B., Du, Z.F. and Lie, S.T., (۲۰۰۹), Prediction of ...
Lotfollahi-Yaghin, M.A. and Ahmadi, H., (۲۰۱۰), Effect of geometrical parameters ...
Ahmadi, H., Lotfollahi-Yaghin, M.A. and Aminfar, M.H., (۲۰۱۱), Geometrical effect ...
Karamanos, S.A. Romeijn, A. and Wardenier, J., (۱۹۹۹), Stress concentrations ...
Chiew, S.P., Soh, C.K. and Wu, N.W., (۲۰۰۰), General SCF ...
Wingerde, A.M., Packer, J.A. and Wardenier, J., (۲۰۰۱), Simplified SCF ...
Karamanos, S.A., Romeijn, A. and Wardenier, J., (۲۰۰۲), SCF equations ...
Lotfollahi-Yaghin, M.A. and Ahmadi, H., (۲۰۱۱), Geometric stress distribution along ...
Ahmadi, H., Lotfollahi-Yaghin, M.A. and Aminfar, M.H., (۲۰۱۱), Distribution of ...
Ahmadi, H., Lotfollahi-Yaghin, M.A. and Aminfar, M.H., (۲۰۱۲), The development ...
Ahmadi, H., Lotfollahi-Yaghin, M.A., (۲۰۱۲), Geometrically parametric study of central ...
Dharmavasan, S. and Aaghaakouchak, A.A., (۱۹۸۸), Stress concentrations in tubular ...
Aaghaakouchak, A.A. and Dharmavasan, S., (۱۹۹۰), Stress analysis of unstiffened ...
Ramachandra Murthy, D.S., Madhava Rao, A.G., Ghandi, P. and Pant, ...
Nwosu, D.I., Swamidas, A.S.J. and Munaswamy, K., (۱۹۹۵), Numerical stress ...
Ramachandra, D.S., Gandhi, P., Raghava, G. and Madhava Rao, A.G., ...
Hoon, K.H., Wong, L.K. and Soh, A.K. (۲۰۰۱), Experimental investigation ...
Myers, P.T., Brennan, F.P. and Dover, W.D., (۲۰۰۱), The effect ...
Woghiren, C.O. and Brennan, F.P., (۲۰۰۹), Weld toe stress concentrations ...
Ahmadi, H., Lotfollahi-Yaghin, M.A., Shao, Y.B. and Aminfar, M.H., (۲۰۱۲), ...
Ahmadi, H., Lotfollahi-Yaghin, M.A. and Shao, Y.B., (۲۰۱۳), Chord-side SCF ...
Ahmadi, H. and Lotfollahi-Yaghin, M.A., (۲۰۱۵), Stress concentration due to ...
Ahmadi, H. and Zavvar, E., (۲۰۱۵), Stress concentration factors induced ...
Ahmadi, H., Lotfollahi-Yaghin, M.A. and Aminfar, M.H., (۲۰۱۱), Effect of ...
Ahmadi, H. and Lotfollahi-Yaghin, M.A., (۲۰۱۲), A probability distribution model ...
Ahmadi, H. and Lotfollahi-Yaghin, M.A., (۲۰۱۳), Effect of SCFs on ...
Dallyn, P., El-Hamalawi, A., Palmeri, A. and Knight, R., (۲۰۱۵), ...
Ahmadi, H., Mohammadi, A.H. and Yeganeh, A., (۲۰۱۵), Probability density ...
Ahmadi, H., Mohammadi, A.H., Yeganeh, A. and Zavvar, E., (۲۰۱۶), ...
UK Department of Energy, (۱۹۸۳), Background notes to the fatigue ...
American Welding Society (AWS), (۲۰۰۲), Structural welding code: AWS D ...
N’Diaye, A., Hariri, S., Pluvinage, G. and Azari, Z., (۲۰۰۷), ...
IIW-XV-E, (۱۹۹۹), Recommended fatigue design procedure for welded hollow section ...
Bomel Consulting Engineers, (۱۹۹۴), Assessment of SCF equations using Shell/KSEPL ...
نمایش کامل مراجع