Investigating the effect of MoS2 on the wear resistance of spur gears
Publish place: 20th Annual Conference of Mechanical Engineering
Publish Year: 1391
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,447
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME20_184
تاریخ نمایه سازی: 18 تیر 1391
Abstract:
In this study, wear of spur gears is simulated using numerical methods based on modified Archard’s model. The contact pressure is assumed to be equal to the Hertzian mean pressure. A MATLAB program is developed to calculate the wear depth for each meshing cycle. The results show that wear depth is high both in addendum and dedendum of the tooth flank and maximum wear occurs at dedendum region. Also addition of MoS2 increases the wear resistance. Using Hertzian mean pressure instead of elliptical distribution increases the computational speed significantly. The gain in required computation time using this simplification is almost 30 times. Simulation results with the simplified model are in good agreement with corresponding results from the more extensive model.
Keywords:
Authors
F. Vakili Tahami
University of Tabriz/Department of Mechanical Engineering
A. Hoseinzadeh Foroughi
University of Tabriz/Department of Mechanical Engineering
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :