The effect of using smart shadings on the thermal and visual performances of buildings in Iran: A numerical simulation
Publish place: Energy Equipment and Systems، Vol: 11، Issue: 4
Publish Year: 1402
نوع سند: مقاله ژورنالی
زبان: English
View: 65
This Paper With 16 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_EES-11-4_001
تاریخ نمایه سازی: 26 آذر 1402
Abstract:
This paper presents controlling and optimizing the energy performance of buildings using smart shadings. Simulations are carried out using EnergyPlus and multi-objective optimization is performed by jEPlus+EA through NSGA-II algorithm. Optimization of control strategies is performed for a typical office room on the middle floor of a building in Tehran. Slat angle, solar radiation, and the material of smart windows are selected as decision variables. Also, the annual total building energy consumption, the predicted percentage of dissatisfaction (PPD), and the discomfort glare index (DGI) are considered as three objective functions minimized simultaneously. The weighted sum method to select the final answer of Pareto solutions is used. In the first strategy, a comparison of the results of optimization with the initial values when the angles of slats are constant and equal to ۴۵° showed that the total annual energy consumption, DGI, and PPD indexes reduced up to ۱۱.۷۴%, ۶.۴%, and ۴۶.۶%, respectively. In the second strategy, the reductions were ۲۸.۷۳, ۵۶.۵۰, and ۳۴.۰۵%, respectively, in comparison with the double-glazing window. The results clearly show how the correct selection of architectural parameters and control strategies can greatly prevent energy losses while providing the thermal and visual comfort of the building occupants.
Keywords:
Authors
Fatemeh Mirala
School of Mechanical Engineering, College of Engineering, University of Tehran
Behrang Sajadi
School of Mechanical Engineering, College of Engineering, University of Tehran
Mohammad Ali Akhavan Behabadi
School of Mechanical Engineering, College of Engineering, University of Tehran
Ehsan Naderi
School of Mechanical Engineering, College of Engineering, University of Tehran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :