OPTIMIZATION OF NON-LINEAR DIE SURFACE IN EXTRUSION OF NON-CIRCULAR SECTIONS
Publish place: 13th Annual Conference of Mechanical Engineering
Publish Year: 1384
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,875
This Paper With 6 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME13_658
تاریخ نمایه سازی: 21 اسفند 1385
Abstract:
In this paper an analytical method for noncircular shape extrusion is reported. With this method non-linear deformation field can be described with Hermit cubic spline which is prescribed by the boundary conditions of the die at its entry and exit. The Upper bound method has been used to obtain optimum coefficient of the tangential boundary conditions. The results show that the optimum tangential parameter and the extrusion
force that determined by this method have good agreement with finite element method. Also physical modeling test show that optimum non-linear die could reduce extrusion force and strain variation than those using the linear die.
Keywords:
Upper bound method-Deformation field-Non linear die-Physical modeling
Authors
Assempour
Assistant professor, Center of Excellence in design, Robotics and automation, Mechanical Engineering Department, Sharif University of Technology
Farahani
Graduate student, Center of Excellence in design, Robotics and automation, Mechanical Engineering Department, Sharif University of Technology
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :