PLASMA NITRIDING OF FORMING ROLLS IN COLD ROLL FORMING PROCESS TO IMPROVE THE SERVICE LIFE
Publish place: 15th Annual Conference of Mechanical Engineering
Publish Year: 1386
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,352
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME15_636
تاریخ نمایه سازی: 8 فروردین 1386
Abstract:
Plasma nitriding is known to improve and rectify the service life of rolls; thus this amendment also depends on the type of the steel. AISI D2 tool steel is widely used in Cold Roll Forming (CRF). In this researches the structure and Wear properties of plasma nitrided D2 steel is evaluated. Plasma treatments are carried out using an industrial size furnace in appropriate nitrogen–hydrogen mixture and Pin-on-Disk Wear Tester Machine is employed to obtain the Wear behavior. The micro hardness profiles were used to demonstrate the case depth. The structures of surface layers and diffusion zone are examined by optical and X-ray diffractions (XRD). It is found that thermo chemical processing significantly increased the micro hardness and wear behavior and service life of D2 steel rolls.
Keywords:
Authors
Amin Poursafar
MS. Student, Department of Mechanical Engineering, Urmia University Isfahan
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :