Influence of carbon nanotube content on tribological behavior of high density polyethylene

Publish Year: 1395
نوع سند: مقاله کنفرانسی
زبان: English
View: 729

This Paper With 9 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

IMES10_351

تاریخ نمایه سازی: 6 اردیبهشت 1396

Abstract:

Surface modified multi-walled carbon nanotubes (MWCNTs) were added to high density polyethylene (HDPE) to enhance its mechanical and tribological properties. CNT/HDPE composites were fabricated by mechanical jar milling of MWCNTs and HDPE powders, followed by compression molding of the composite powder. This fabrication process resulted in uniform dispersion of CNTs in the matrix. Vickers microhardness evaluation indicated gradual increase in hardness by incorporation of CNTs. Pin on disc wear tests was performed to evaluate tribological properties of the fabricated samples. The results showed that addition of CNTs decreased average mass loss and increased coefficient of friction of HDPE. Worn surfaces also were observed and analyzed by scanning electron microscope (SEM) in order to explain the changes in tribological properties

Authors

majid Mokarizadeh

Graduate Student Department of materials science and engineering, School of engineering, Shiraz University, Shiraz, Iran

Seyed Mojtaba Zebarjad

Professor, Department of materials science and engineering, School of engineering, Shiraz University, Shiraz, Iran

Ramin Ebrahimi

Professor, Department of materials science and engineering, School of engineering, Shiraz University, Shiraz, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • بنجمین کنفرنس بین‌لمللی مهندسی‌مود ومتلویی ودهمین کنفرنس مشترک‌فجمن مهندسین _ ...
  • , 9 Nov. 2016 Shiraz University ...
  • D. Qian, E. C. Dickey, R. Andrews, and T. Rantell, ...
  • A. R. Bhattacharyya, T. V. Sreekumar, T. Liu, S. Kumar, ...
  • K. Xiao, L. Zhang, and I. Zarudi, "Mechanical and rheological ...
  • A. H. Barber, S. R. Cohen, and H. _ Wagner, ...
  • Y. Bin, M. Kitanaka, D. Zhu, and M. Matsuo, "Development ...
  • L. Valentini, I. Armentano, J. Biagiotti, E. Frulloni, J. M. ...
  • W. Feng, X. _ Bai, Y. Q. Lian, J. Liang, ...
  • A. Wang, ":A unified theory of wear for ultra-high molecular ...
  • Y. Xue, W. Wu, O. Jacobs, and B. Schadel, "Tribological ...
  • B. B. Johnson, M. H. Santare, J. E. Novotny, and ...
  • _ M. H. Moghim and S. M. Zebarjad, "Effect of ...
  • C. Laurent, E. Flahaut, and A. Peigney, "The weight and ...
  • Y. S. Zoo, J. W. An, D. P. Lim, and ...
  • نمایش کامل مراجع