TRIBOLOGICAL PROPERTIES OF Al/SiO2, NANOCOMPOSITE SHEETS PRODUCED BY ACCUMULATIVE ROLL BONDING (ARB) PROCESS
Publish Year: 1390
نوع سند: مقاله کنفرانسی
زبان: English
View: 471
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
UFGNSM03_225
تاریخ نمایه سازی: 10 تیر 1396
Abstract:
Accumulative roll-bonding process (ARB) is a well-known severe plastic deformation technique for production of the ultrafine grained, nanostructured and nanocomposite materials in the form of sheets. In the present study, this process used for manufacturing Al/SiO2 nanocomposites by using Aluminum 1050 alloy sheets and nano sized SiO, particles, at ambient temperature. After 8 cycles of ARB process, the mechanical properties, tribological properties and wear resistance of produced nanocomposites were investigated. The wear tests by abrasion were performed in a pin-on-disc tribometer. Results show that by increasing ARB cycles and the amount of nano powders, the friction coefficient decreases,
Keywords:
Sever Plastic Deformation (SPD) process , Accumulative Roll Bonding (ARB) , Tribological Properties , Nanocomposite
Authors
MAHDI KADKHODAEE
Department of Materials Science and Engineering, School of Engineering, Shiraz University Zand St, Shiraz, Fars, Iran
HABIB DANESHMANESH
Department of Materials Science and Engineering, School of Engineering, Shiraz University Zand St, Shiraz Fars, Iran
BABAK HASHEMI
Department of Materials Science and Engineering, School of Engineering, Shiraz University Zand St, Shiraz Fars, Iran
JAVAD MORADGHOLI
Department of Materials Science and Engineering, School of Engineering, Shiraz University Zand St, Shiraz Fars, Iran