Improving Sand Production Control Using a New Chemical Method
Publish place: 1st National Iranian Fracture Reservior Development Congress
Publish Year: 1387
نوع سند: مقاله کنفرانسی
زبان: English
View: 2,285
This Paper With 16 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NIFRC01_011
تاریخ نمایه سازی: 6 خرداد 1388
Abstract:
Because the sand production becomes a historical issue in oil and gas wells, the petroleum engineers tried to find methods to reduce the sand production. So there are many methods to reduce sand production by using mechanical methods, chemical methods or combination of these two types. Some methods are controlling the sand production very well, some reducing it partially and some methods fail to control the sand production. The objective of this study
is to investigate the potential use of a new chemical method to minimize sand production from oil and gas wells. This study address is the use of new chemical method to minimize sand production by bonding grains of the formation sand and adding small strength for the formation. Due to the effect of injected polymer on effective permeability of reservoir hydrocarbon, the sand pack model was prepared and the relation between the effective permeability of oil and water due to gel injection was studied. Two cases were tested, injection of the 0.25 and 0.5 PV of polymer gel. Injecting 0.25 PV of polymer gel reduced oil effective permeability from 4201.35 mD to 3429.67 mD which means 22.5 % reduction in oil effective permeability (which is not a bad result), while injecting 0.5 PV of polymer gel reduced oil effective permeability from to 4419.64 mD to 267.83 mD which is 93.94 % reduction in oil effective permeability. Therefore first case (injection of 0.25 PV of polymer) gave better results since oil effective permeability was not seriously altered.
Authors
Abouzar Mirzaei Paiaman
Sharif University of Technology
Hamdan AlYami
Saudi Aramco
Bandar Duraya AlAnazi
King Abdulaziz City for Science & Technology
Mohsen Masihi
Sharif University of Technology
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :